Register 66 was causing issues on RT6352 if set to the same value as in MTK driver. With 1c reg value device was working fine in both HT20 and HT40 modes. Signed-off-by: Tomislav Požega <pozega.tomislav@xxxxxxxxx> Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx> --- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c index 1a2bf6c49b82..3a04eaef8511 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -3981,11 +3981,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, rt2800_bbp_write(rt2x00dev, 196, reg); /* AGC init */ - if (rt2x00_rt(rt2x00dev, RT6352)) - reg = 0x04; - else - reg = rf->channel <= 14 ? 0x1c : 0x24; - + reg = rf->channel <= 14 ? 0x1c : 0x24; reg += 2 * rt2x00dev->lna_gain; rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); -- 2.7.5
