If the first virtual interface is a station (or an AP with beacons
temporarily disabled), the beacon of the second interface needs to
occupy hardware beacon slot 0.
For some reason the beacon index was incorrectly masked with the
virtual interface beacon mask, which prevents the secondary
interface from sending beacons unless the first one also does.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt76x2_mac.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_mac.c b/drivers/net/wireless/mediatek/mt76/mt76x2_mac.c
index 25ce8fcbb873..bb9c0a059a6e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2_mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_mac.c
@@ -129,8 +129,7 @@ __mt76x2_mac_set_beacon(struct mt76x2_dev *dev, u8 bcn_idx, struct sk_buff *skb)
if (skb) {
ret = mt76_write_beacon(dev, beacon_addr, skb);
if (!ret)
- dev->beacon_data_mask |= BIT(bcn_idx) &
- dev->beacon_mask;
+ dev->beacon_data_mask |= BIT(bcn_idx);
} else {
dev->beacon_data_mask &= ~BIT(bcn_idx);
for (i = 0; i < beacon_len; i += 4)
--
2.17.0
