I was waiting for you to send this like a spider waits for flies. You
fell directly into my trap. Mwuahahahahaha.
drivers/staging/wilc1000/linux_wlan.c
1056 int wilc_netdev_init(struct wilc **wilc, struct device *dev, int io_type,
1057 const struct wilc_hif_func *ops)
1058 {
1059 int i, ret = -ENOMEM;
1060 struct wilc_vif *vif;
1061 struct net_device *ndev;
1062 struct wilc *wl;
1063
1064 wl = kzalloc(sizeof(*wl), GFP_KERNEL);
1065 if (!wl)
1066 return ret;
^^^
It's cleaner to return -ENOMEM so that we don't have to glance up to the
declaration block. This is especially true when "ret" is zero, btw,
because that can indicate a reversed test.
if (!ret)
return ret;
In this theoretically example it was supposed to be:
if (ret)
return ret;
Normally, reversed conditions are caught in testing, but for the kernel,
no one has the hardware to test everything so we do get reversed
conditions from time to time.
1067
1068 if (wilc_wlan_cfg_init(wl))
1069 goto free_wl;
1070
1071 *wilc = wl;
1072 wl->io_type = io_type;
1073 wl->hif_func = ops;
1074 wl->enable_ps = true;
1075 wl->chip_ps_state = CHIP_WAKEDUP;
1076 INIT_LIST_HEAD(&wl->txq_head.list);
1077 INIT_LIST_HEAD(&wl->rxq_head.list);
1078
1079 wl->hif_workqueue = create_singlethread_workqueue("WILC_wq");
1080 if (!wl->hif_workqueue)
1081 goto free_cfg;
1082
1083 register_inetaddr_notifier(&g_dev_notifier);
1084
1085 for (i = 0; i < NUM_CONCURRENT_IFC; i++) {
1086 struct wireless_dev *wdev;
1087
1088 ndev = alloc_etherdev(sizeof(struct wilc_vif));
1089 if (!ndev)
1090 goto free_ndev;
^^^^^^^^^^^^^^^
ret is zero on the second iteration through the loop.
1091
1092 vif = netdev_priv(ndev);
1093 memset(vif, 0, sizeof(struct wilc_vif));
1094
1095 if (i == 0) {
1096 strcpy(ndev->name, "wlan%d");
1097 vif->ifc_id = 1;
1098 } else {
1099 strcpy(ndev->name, "p2p%d");
1100 vif->ifc_id = 0;
1101 }
1102 vif->wilc = *wilc;
1103 vif->ndev = ndev;
1104 wl->vif[i] = vif;
1105 wl->vif_num = i;
1106 vif->idx = wl->vif_num;
1107
1108 ndev->netdev_ops = &wilc_netdev_ops;
1109
1110 wdev = wilc_create_wiphy(ndev, dev);
1111 if (!wdev) {
1112 netdev_err(ndev, "Can't register WILC Wiphy\n");
1113 goto free_ndev;
^^^^^^^^^^^^^^^
Here too.
1114 }
1115
1116 SET_NETDEV_DEV(ndev, dev);
1117
1118 vif->ndev->ieee80211_ptr = wdev;
1119 vif->ndev->ml_priv = vif;
1120 wdev->netdev = vif->ndev;
1121 vif->netstats.rx_packets = 0;
1122 vif->netstats.tx_packets = 0;
1123 vif->netstats.rx_bytes = 0;
1124 vif->netstats.tx_bytes = 0;
1125
1126 ret = register_netdev(ndev);
1127 if (ret)
1128 goto free_ndev;
^^^^^^^^
ret is cleared on the first iteration through the loop.
1129
1130 vif->iftype = STATION_MODE;
1131 vif->mac_opened = 0;
1132 }
1133
1134 return 0;
regards,
dan carpenter
