Instead of using static variable 'g_spi' move it as part of 'wilc'
struct. Also allocating the memory in the probe function and
free is taken care in wilc_netdev_cleanup().
Signed-off-by: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx>
---
drivers/staging/wilc1000/wilc_spi.c | 58 +++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
index 5517477..2559cf0 100644
--- a/drivers/staging/wilc1000/wilc_spi.c
+++ b/drivers/staging/wilc1000/wilc_spi.c
@@ -14,7 +14,6 @@ struct wilc_spi {
int has_thrpt_enh;
};
-static struct wilc_spi g_spi;
static const struct wilc_hif_func wilc_hif_spi;
/********************************************
@@ -107,6 +106,11 @@ static int wilc_bus_probe(struct spi_device *spi)
int ret;
struct wilc *wilc;
struct gpio_desc *gpio;
+ struct wilc_spi *spi_priv;
+
+ spi_priv = kzalloc(sizeof(*spi_priv), GFP_KERNEL);
+ if (!spi_priv)
+ return -ENOMEM;
gpio = gpiod_get(&spi->dev, "irq", GPIOD_IN);
if (IS_ERR(gpio)) {
@@ -117,11 +121,14 @@ static int wilc_bus_probe(struct spi_device *spi)
}
ret = wilc_netdev_init(&wilc, NULL, HIF_SPI, &wilc_hif_spi);
- if (ret)
+ if (ret) {
+ kfree(spi_priv);
return ret;
+ }
spi_set_drvdata(spi, wilc);
wilc->dev = &spi->dev;
+ wilc->bus_data = spi_priv;
wilc->gpio_irq = gpio;
return 0;
@@ -275,6 +282,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
u8 clockless)
{
struct spi_device *spi = to_spi_device(wilc->dev);
+ struct wilc_spi *spi_priv = wilc->bus_data;
u8 wb[32], rb[32];
u8 wix, rix;
u32 len2;
@@ -375,7 +383,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
if (result != N_OK)
return result;
- if (!g_spi.crc_off)
+ if (!spi_priv->crc_off)
wb[len - 1] = (crc7(0x7f, (const u8 *)&wb[0], len - 1)) << 1;
else
len -= 1;
@@ -393,7 +401,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
} else if (cmd == CMD_INTERNAL_READ || cmd == CMD_SINGLE_READ) {
int tmp = NUM_RSP_BYTES + NUM_DATA_HDR_BYTES + NUM_DATA_BYTES
+ NUM_DUMMY_BYTES;
- if (!g_spi.crc_off)
+ if (!spi_priv->crc_off)
len2 = len + tmp + NUM_CRC_BYTES;
else
len2 = len + tmp;
@@ -485,7 +493,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
return N_FAIL;
}
- if (!g_spi.crc_off) {
+ if (!spi_priv->crc_off) {
/*
* Read Crc
*/
@@ -527,7 +535,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
/*
* Read Crc
*/
- if (!g_spi.crc_off && wilc_spi_rx(wilc, crc, 2)) {
+ if (!spi_priv->crc_off && wilc_spi_rx(wilc, crc, 2)) {
dev_err(&spi->dev,
"Failed block crc read, bus err\n");
return N_FAIL;
@@ -585,7 +593,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
/*
* Read Crc
*/
- if (!g_spi.crc_off && wilc_spi_rx(wilc, crc, 2)) {
+ if (!spi_priv->crc_off && wilc_spi_rx(wilc, crc, 2)) {
dev_err(&spi->dev,
"Failed block crc read, bus err\n");
result = N_FAIL;
@@ -602,6 +610,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
{
struct spi_device *spi = to_spi_device(wilc->dev);
+ struct wilc_spi *spi_priv = wilc->bus_data;
int ix, nbytes;
int result = 1;
u8 cmd, order, crc[2] = {0};
@@ -648,7 +657,7 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
/*
* Write Crc
*/
- if (!g_spi.crc_off) {
+ if (!spi_priv->crc_off) {
if (wilc_spi_tx(wilc, crc, 2)) {
dev_err(&spi->dev, "Failed data block crc write, bus error...\n");
result = N_FAIL;
@@ -816,6 +825,7 @@ static int _wilc_spi_deinit(struct wilc *wilc)
static int wilc_spi_init(struct wilc *wilc, bool resume)
{
struct spi_device *spi = to_spi_device(wilc->dev);
+ struct wilc_spi *spi_priv = wilc->bus_data;
u32 reg;
u32 chipid;
static int isinit;
@@ -828,12 +838,12 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
return 1;
}
- memset(&g_spi, 0, sizeof(struct wilc_spi));
+ memset(spi_priv, 0, sizeof(struct wilc_spi));
/*
* configure protocol
*/
- g_spi.crc_off = 0;
+ spi_priv->crc_off = 0;
/*
* TODO: We can remove the CRC trials if there is a definite
@@ -845,7 +855,7 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
* Read failed. Try with CRC off. This might happen when module
* is removed but chip isn't reset
*/
- g_spi.crc_off = 1;
+ spi_priv->crc_off = 1;
dev_err(&spi->dev,
"Failed read with CRC on, retrying with CRC off\n");
if (!spi_internal_read(wilc, WILC_SPI_PROTOCOL_OFFSET, ®)) {
@@ -857,7 +867,7 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
return 0;
}
}
- if (g_spi.crc_off == 0) {
+ if (spi_priv->crc_off == 0) {
reg &= ~0xc; /* disable crc checking */
reg &= ~0x70;
reg |= (0x5 << 4);
@@ -867,7 +877,7 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
__LINE__);
return 0;
}
- g_spi.crc_off = 1;
+ spi_priv->crc_off = 1;
}
/*
@@ -878,7 +888,7 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
return 0;
}
- g_spi.has_thrpt_enh = 1;
+ spi_priv->has_thrpt_enh = 1;
isinit = 1;
@@ -888,9 +898,10 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
static int wilc_spi_read_size(struct wilc *wilc, u32 *size)
{
struct spi_device *spi = to_spi_device(wilc->dev);
+ struct wilc_spi *spi_priv = wilc->bus_data;
int ret;
- if (g_spi.has_thrpt_enh) {
+ if (spi_priv->has_thrpt_enh) {
ret = spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE,
size);
*size = *size & IRQ_DMA_WD_CNT_MASK;
@@ -915,6 +926,7 @@ static int wilc_spi_read_size(struct wilc *wilc, u32 *size)
static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
{
struct spi_device *spi = to_spi_device(wilc->dev);
+ struct wilc_spi *spi_priv = wilc->bus_data;
int ret;
u32 tmp;
u32 byte_cnt;
@@ -923,7 +935,7 @@ static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
u32 irq_flags;
int k = IRG_FLAGS_OFFSET + 5;
- if (g_spi.has_thrpt_enh) {
+ if (spi_priv->has_thrpt_enh) {
ret = spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE,
int_status);
return ret;
@@ -943,12 +955,12 @@ static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
wilc_spi_read_reg(wilc, 0x1a90, &irq_flags);
tmp |= ((irq_flags >> 27) << IRG_FLAGS_OFFSET);
- if (g_spi.nint > 5) {
+ if (spi_priv->nint > 5) {
wilc_spi_read_reg(wilc, 0x1a94, &irq_flags);
tmp |= (((irq_flags >> 0) & 0x7) << k);
}
- unknown_mask = ~((1ul << g_spi.nint) - 1);
+ unknown_mask = ~((1ul << spi_priv->nint) - 1);
if ((tmp >> IRG_FLAGS_OFFSET) & unknown_mask) {
dev_err(&spi->dev,
@@ -968,11 +980,12 @@ static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
{
struct spi_device *spi = to_spi_device(wilc->dev);
+ struct wilc_spi *spi_priv = wilc->bus_data;
int ret;
u32 flags;
u32 tbl_ctl;
- if (g_spi.has_thrpt_enh) {
+ if (spi_priv->has_thrpt_enh) {
ret = spi_internal_write(wilc, 0xe844 - WILC_SPI_REG_BASE,
val);
return ret;
@@ -983,7 +996,7 @@ static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
int i;
ret = 1;
- for (i = 0; i < g_spi.nint; i++) {
+ for (i = 0; i < spi_priv->nint; i++) {
/*
* No matter what you write 1 or 0,
* it will clear interrupt.
@@ -1001,7 +1014,7 @@ static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
0x10c8 + i * 4);
return ret;
}
- for (i = g_spi.nint; i < MAX_NUM_INT; i++) {
+ for (i = spi_priv->nint; i < MAX_NUM_INT; i++) {
if (flags & 1)
dev_err(&spi->dev,
"Unexpected interrupt cleared %d...\n",
@@ -1041,6 +1054,7 @@ static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
{
struct spi_device *spi = to_spi_device(wilc->dev);
+ struct wilc_spi *spi_priv = wilc->bus_data;
u32 reg;
int ret, i;
@@ -1049,7 +1063,7 @@ static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
return 0;
}
- g_spi.nint = nint;
+ spi_priv->nint = nint;
/*
* interrupt pin mux select
--
2.7.4
