On Sat, Aug 18, 2018 at 02:01:50PM +0200, Henrik Laxhuber wrote: > [ My previous message didn't go through because I hadn't signed up to ] > [ the wireless-regdb mailing list; I apologise if anyone receives ] > [ this message twice ] Thanks for the patch. However you forgot to include a Signed-off-by tag (see the CONTRIBUTING file). Please also only include a description of the patch in the commit message, any additional comments/questions can be included in a cover letter. Also one small comment about the changes below. > As far as I could tell, the regulatory information for Switzerland and > Liechtenstein did not match the information published by the national > regulator. I have gone ahead and updated the information according to > the 'National Frequency Allocation Strategy Table' [0] for both > countries. > > On a somewhat related note, are there any plans to properly support TPC? > There are quite a few entries in the database where maximum transmission > power could be increased when TPC is in use. Being able to set a > different maximum antenna gain and/or EIRP when TCP is in use could be > helpful in these cases. I guess what's holding this back is lacking > driver support? I haven't heard of any plans for supporting TPC in the kernel. > PS: Since [0] can be cumbersome to navigate, I am also providing the > direct links to the applicable tables. It's possible that these links > will rot: > 5150 - 5350 MHz: [1] > 5470 - 5725 MHz: [2] > > [0] https://www.ofcomnet.ch/#/fatTable > [1] https://www.ofcomnet.ch/api/rir/1010/05 > [2] https://www.ofcomnet.ch/api/rir/1010/04 > --- > db.txt | 19 +++++++++++++++---- > 1 file changed, 15 insertions(+), 4 deletions(-) > > diff --git a/db.txt b/db.txt > index 8cf7dee..69cea85 100644 > --- a/db.txt > +++ b/db.txt > @@ -265,10 +265,14 @@ country CF: DFS-FCC > (5490 - 5730 @ 40), (24), DFS > (5735 - 5835 @ 40), (30) > > +# Source: > +# https://www.ofcomnet.ch/#/fatTable > +# Note that the maximum transmitter power can be doubled for 5250-5710MHz > if > +# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db > country CH: DFS-ETSI > (2402 - 2482 @ 40), (20) > - (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI > - (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI > + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI This should also be changed to 5150-5250. Thanks, Seth > + (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI > (5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI > # 60 GHz band channels 1-4, ref: Etsi En 302 567 > (57000 - 66000 @ 2160), (40) > @@ -743,11 +747,18 @@ country LC: DFS-ETSI > (5490 - 5710 @ 160), (30), DFS > (5735 - 5815 @ 80), (30) > > + > +# Source: > +# https://www.ofcomnet.ch/#/fatTable > +# Note that the maximum transmitter power can be doubled for 5250-5710MHz > if > +# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db > country LI: DFS-ETSI > (2402 - 2482 @ 40), (20) > - (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI > - (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI > + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI > + (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI > (5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI > + # 60 GHz band channels 1-4, ref: Etsi En 302 567 > + (57000 - 66000 @ 2160), (40) > > country LK: DFS-FCC > (2402 - 2482 @ 40), (20) > -- > 2.18.0 >
