Decoding of firmware channel information was not complete for 160MHz
support. This resulted in the following warning:
WARNING: CPU: 2 PID: 2222 at .../broadcom/brcm80211/brcmutil/d11.c:196
brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
Modules linked in: brcmfmac(O) brcmutil(O) sha256_generic cfg80211 ...
CPU: 2 PID: 2222 Comm: kworker/2:0 Tainted: G O
4.17.0-wt-testing-x64-00002-gf1bed50 #1
Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
Workqueue: events request_firmware_work_func
RIP: 0010:brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
RSP: 0018:ffffc90000047bd0 EFLAGS: 00010206
RAX: 000000000000e832 RBX: ffff8801146fe910 RCX: ffff8801146fd3c0
RDX: 0000000000002800 RSI: 0000000000000070 RDI: ffffc90000047c30
RBP: ffffc90000047bd0 R08: 0000000000000000 R09: ffffffffa0798c80
R10: ffff88012bca55e0 R11: ffff880110a4ea00 R12: ffff8801146f8000
R13: ffffc90000047c30 R14: ffff8801146fe930 R15: ffff8801138e02e0
FS: 0000000000000000(0000) GS:ffff88012bc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f18ce8b8070 CR3: 000000000200a003 CR4: 00000000000206e0
Call Trace:
brcmf_setup_wiphybands+0x212/0x780 [brcmfmac]
brcmf_cfg80211_attach+0xae2/0x11a0 [brcmfmac]
brcmf_attach+0x1fc/0x4b0 [brcmfmac]
? __kmalloc+0x13c/0x1c0
brcmf_pcie_setup+0x99b/0xe00 [brcmfmac]
brcmf_fw_request_done+0x16a/0x1f0 [brcmfmac]
request_firmware_work_func+0x36/0x60
process_one_work+0x146/0x350
worker_thread+0x4a/0x3b0
kthread+0x102/0x140
? process_one_work+0x350/0x350
? kthread_bind+0x20/0x20
ret_from_fork+0x35/0x40
Code: 66 90 0f b7 07 55 48 89 e5 89 c2 88 47 02 88 47 03 66 81 e2 00 38
66 81 fa 00 18 74 6e 66 81 fa 00 20 74 39 66 81 fa 00 10 74 14 <0f>
0b 66 25 00 c0 74 20 66 3d 00 c0 75 20 c6 47 04 01 5d c3 66
---[ end trace 550c46682415b26d ]---
brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 50
This patch adds the missing stuff to properly handle this.
Reviewed-by: Hante Meuleman <hante.meuleman@xxxxxxxxxxxx>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@xxxxxxxxxxxx>
Reviewed-by: Franky Lin <franky.lin@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
---
.../net/wireless/broadcom/brcm80211/brcmutil/d11.c | 34 +++++++++++++++++++++-
.../broadcom/brcm80211/include/brcmu_wifi.h | 2 ++
2 files changed, 35 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
index d8b79cb..e7584b8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
@@ -77,6 +77,8 @@ static u16 d11ac_bw(enum brcmu_chan_bw bw)
return BRCMU_CHSPEC_D11AC_BW_40;
case BRCMU_CHAN_BW_80:
return BRCMU_CHSPEC_D11AC_BW_80;
+ case BRCMU_CHAN_BW_160:
+ return BRCMU_CHSPEC_D11AC_BW_160;
default:
WARN_ON(1);
}
@@ -190,8 +192,38 @@ static void brcmu_d11ac_decchspec(struct brcmu_chan *ch)
break;
}
break;
- case BRCMU_CHSPEC_D11AC_BW_8080:
case BRCMU_CHSPEC_D11AC_BW_160:
+ switch (ch->sb) {
+ case BRCMU_CHAN_SB_LLL:
+ ch->control_ch_num -= CH_70MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_LLU:
+ ch->control_ch_num -= CH_50MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_LUL:
+ ch->control_ch_num -= CH_30MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_LUU:
+ ch->control_ch_num -= CH_10MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_ULL:
+ ch->control_ch_num += CH_10MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_ULU:
+ ch->control_ch_num += CH_30MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_UUL:
+ ch->control_ch_num += CH_50MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_UUU:
+ ch->control_ch_num += CH_70MHZ_APART;
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ break;
+ }
+ break;
+ case BRCMU_CHSPEC_D11AC_BW_8080:
default:
WARN_ON_ONCE(1);
break;
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
index 91fca79..dddebaa 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
@@ -29,6 +29,8 @@
#define CH_UPPER_SB 0x01
#define CH_LOWER_SB 0x02
#define CH_EWA_VALID 0x04
+#define CH_70MHZ_APART 14
+#define CH_50MHZ_APART 10
#define CH_30MHZ_APART 6
#define CH_20MHZ_APART 4
#define CH_10MHZ_APART 2
--
1.9.1
