According to the legacy drivers the LED association status must be reset after the firmware has been uploaded to the hardware. Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx> --- drivers/net/wireless/rt2x00/rt2x00firmware.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c index b971bc6..bab05a5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00firmware.c +++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c @@ -100,6 +100,14 @@ int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) retval = rt2x00dev->ops->lib->load_firmware(rt2x00dev, rt2x00dev->fw->data, rt2x00dev->fw->size); + + /* + * When the firmware is uploaded to the hardware the LED + * association status might have been triggered, for correct + * LED handling it should now be reset. + */ + rt2x00leds_led_assoc(rt2x00dev, false); + return retval; } -- 1.5.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
