Rakesh Pillai <pillair@xxxxxxxxxxxxxx> wrote: > The tx completion of multiple mgmt frames can be bundled > in a single event and sent by the firmware to host, if this > capability is not disabled explicitly by the host. If the host > cannot handle the bundled mgmt tx completion, this capability > support needs to be disabled in the wmi init cmd, sent to the firmware. > > Add the host capability indication flag in the wmi ready command, > to let firmware know the features supported by the host driver. > This field is ignored if it is not supported by firmware. > > Set the host capability indication flag(i.e. host_capab) to zero, > for disabling the support of bundle mgmt tx completion. This will > indicate the firmware to send completion event for every mgmt tx > completion, instead of bundling them together and sending in a single > event. > > Tested HW: WCN3990 > Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 > > Signed-off-by: Surabhi Vishnoi <svishnoi@xxxxxxxxxxxxxx> > Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx> > Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx> 2 patches applied to ath-next branch of ath.git, thanks. 673bc519c558 ath10k: disable bundle mgmt tx completion event support dc405152bb64 ath10k: handle mgmt tx completion event -- https://patchwork.kernel.org/patch/10493381/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
