Search Linux Wireless

[PATCH 2/9] ath9k: don't run periodic and nf calibation at the same time

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The checks already prevents periodic cal from being started while noise
floor calibration runs. It is missing checks for the other way around.

Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
---
 drivers/net/wireless/ath/ath9k/ar9002_calib.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index 50fcd343c41a..fd9db8ca99d7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -676,10 +676,10 @@ static int ar9002_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
 			return 0;
 
 		ah->cal_list_curr = currCal = currCal->calNext;
-		if (currCal->calState == CAL_WAITING) {
+		if (currCal->calState == CAL_WAITING)
 			ath9k_hw_reset_calibration(ah, currCal);
-			return 0;
-		}
+
+		return 0;
 	}
 
 	/* Do NF cal only at longer intervals */
-- 
2.17.0




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux