On 7/11/2018 9:48 PM, Jakub Kicinski wrote:
CC: linux-wireless, wifi chips used to have similar problem
On Wed, 11 Jul 2018 13:42:57 +0300, Alex Vesker wrote:
This is a proposal which will allow access to driver defined address
regions using devlink. Each device can create its supported address
regions and register them. A device which exposes a region will allow
access to it using devlink.
The suggested implementation will allow exposing regions to the user,
reading and dumping snapshots taken from different regions.
A snapshot represents a memory image of a region taken by the driver.
If a device collects a snapshot of an address region it can be later
exposed using devlink region read or dump commands.
This functionality allows for future analyses on the snapshots to be
done.
The major benefit of this support is not only to provide access to
internal address regions which were inaccessible to the user but also
to provide an additional way to debug complex error states using the
region snapshots.
Implemented commands:
$ devlink region help
$ devlink region show [ DEV/REGION ]
$ devlink region del DEV/REGION snapshot SNAPSHOT_ID
$ devlink region dump DEV/REGION [ snapshot SNAPSHOT_ID ]
$ devlink region read DEV/REGION [ snapshot SNAPSHOT_ID ]
address ADDRESS length length
You got me excited with the read without snapshot but then you say below
that it's future work :)
Show all of the exposed regions with region sizes:
$ devlink region show
pci/0000:00:05.0/cr-space: size 1048576 snapshot [1 2]
pci/0000:00:05.0/fw-health: size 64 snapshot [1 2]
Delete a snapshot using:
$ devlink region del pci/0000:00:05.0/cr-space snapshot 1
Dump a snapshot:
$ devlink region dump pci/0000:00:05.0/fw-health snapshot 1
0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30
0000000000000010 0000 0000 ffff ff04 0029 8c00 0028 8cc8
0000000000000020 0016 0bb8 0016 1720 0000 0000 c00f 3ffc
0000000000000030 bada cce5 bada cce5 bada cce5 bada cce5
Read a specific part of a snapshot:
$ devlink region read pci/0000:00:05.0/fw-health snapshot 1 address 0
length 16
0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30
For more information you can check devlink-region.8 man page
Future:
There is a plan to extend the support to include a write command
as well as performing read and dump live region
Reading live region would be very interesting and alleviate the need
for complicated ethtool dump marshalling a number of drivers started
doing (incl. nfp). Any plans on that?
Yes I plan to also support read of live regions.
Unlike ethtool which works per netdevice this will allow access per PCI
device,
this allows reading region/dump on IPoIB ULP for example, which
cannot implement a vendor specific dump using ethtool.
Write support I'm less excited about :)
