[PATCH 4/9] mt76: adjust AGC control register 26 based on gain for VHT80

[Felix Fietkau <nbd@xxxxxxxx>]

Use values based on the vendor driver

Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
---
 drivers/net/wireless/mediatek/mt76/mt76x2_phy.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c b/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c
index a510f116d52a..a2c3f0e35f86 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c
@@ -525,10 +525,17 @@ mt76x2_phy_update_channel_gain(struct mt76x2_dev *dev)
 
 	dev->cal.low_gain = low_gain;
 
-	if (dev->mt76.chandef.width == NL80211_CHAN_WIDTH_80)
+	if (dev->mt76.chandef.width == NL80211_CHAN_WIDTH_80) {
 		mt76_wr(dev, MT_BBP(RXO, 14), 0x00560211);
-	else
+		val = mt76_rr(dev, MT_BBP(AGC, 26)) & ~0xf;
+		if (low_gain == 2)
+			val |= 0x3;
+		else
+			val |= 0x5;
+		mt76_wr(dev, MT_BBP(AGC, 26), val);
+	} else {
 		mt76_wr(dev, MT_BBP(RXO, 14), 0x00560423);
+	}
 
 	if (low_gain == 2) {
 		mt76_wr(dev, MT_BBP(RXO, 18), 0xf000a990);
-- 
2.17.0