Talyn-MB introduces various of FW download options:
FW download via PCIe, SPI or PBL for secured access.
The boot and FW download path is determined based on the
OTP HW register. Driver reads this register as part of the
SW reset flow and performs the appropriate initialization
sequence.
Signed-off-by: Maya Erez <merez@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/wil6210/main.c | 194 ++++++++++++++++++++++++-----
drivers/net/wireless/ath/wil6210/wil6210.h | 9 +-
2 files changed, 171 insertions(+), 32 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index e0072b6..4de19bd 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -112,9 +112,29 @@ static int ring_order_set(const char *val, const struct kernel_param *kp)
module_param_cb(bcast_ring_order, &ring_order_ops, &bcast_ring_order, 0444);
MODULE_PARM_DESC(bcast_ring_order, " Bcast ring order; size = 1 << order");
-#define RST_DELAY (20) /* msec, for loop in @wil_target_reset */
+enum {
+ WIL_BOOT_ERR,
+ WIL_BOOT_VANILLA,
+ WIL_BOOT_PRODUCTION,
+ WIL_BOOT_DEVELOPMENT,
+};
+
+enum {
+ WIL_SIG_STATUS_VANILLA = 0x0,
+ WIL_SIG_STATUS_DEVELOPMENT = 0x1,
+ WIL_SIG_STATUS_PRODUCTION = 0x2,
+ WIL_SIG_STATUS_CORRUPTED_PRODUCTION = 0x3,
+};
+
+#define RST_DELAY (20) /* msec, for loop in @wil_wait_device_ready */
#define RST_COUNT (1 + 1000/RST_DELAY) /* round up to be above 1 sec total */
+#define PMU_READY_DELAY_MS (4) /* ms, for sleep in @wil_wait_device_ready */
+
+#define OTP_HW_DELAY (200) /* usec, loop in @wil_wait_device_ready_talyn_mb */
+/* round up to be above 2 ms total */
+#define OTP_HW_COUNT (1 + 2000 / OTP_HW_DELAY)
+
/*
* Due to a hardware issue,
* one has to read/write to/from NIC in 32-bit chunks;
@@ -831,11 +851,146 @@ static void wil_set_oob_mode(struct wil6210_priv *wil, u8 mode)
}
}
-static int wil_target_reset(struct wil6210_priv *wil, int no_flash)
+static int wil_wait_device_ready(struct wil6210_priv *wil, int no_flash)
{
int delay = 0;
u32 x, x1 = 0;
+ /* wait until device ready. */
+ if (no_flash) {
+ msleep(PMU_READY_DELAY_MS);
+
+ wil_dbg_misc(wil, "Reset completed\n");
+ } else {
+ do {
+ msleep(RST_DELAY);
+ x = wil_r(wil, RGF_USER_BL +
+ offsetof(struct bl_dedicated_registers_v0,
+ boot_loader_ready));
+ if (x1 != x) {
+ wil_dbg_misc(wil, "BL.ready 0x%08x => 0x%08x\n",
+ x1, x);
+ x1 = x;
+ }
+ if (delay++ > RST_COUNT) {
+ wil_err(wil, "Reset not completed, bl.ready 0x%08x\n",
+ x);
+ return -ETIME;
+ }
+ } while (x != BL_READY);
+
+ wil_dbg_misc(wil, "Reset completed in %d ms\n",
+ delay * RST_DELAY);
+ }
+
+ return 0;
+}
+
+static int wil_wait_device_ready_talyn_mb(struct wil6210_priv *wil)
+{
+ u32 otp_hw;
+ u8 signature_status;
+ bool otp_signature_err;
+ bool hw_section_done;
+ u32 otp_qc_secured;
+ int delay = 0;
+
+ /* Wait for OTP signature test to complete */
+ usleep_range(2000, 2200);
+
+ wil->boot_config = WIL_BOOT_ERR;
+
+ /* Poll until OTP signature status is valid.
+ * In vanilla and development modes, when signature test is complete
+ * HW sets BIT_OTP_SIGNATURE_ERR_TALYN_MB.
+ * In production mode BIT_OTP_SIGNATURE_ERR_TALYN_MB remains 0, poll
+ * for signature status change to 2 or 3.
+ */
+ do {
+ otp_hw = wil_r(wil, RGF_USER_OTP_HW_RD_MACHINE_1);
+ signature_status = WIL_GET_BITS(otp_hw, 8, 9);
+ otp_signature_err = otp_hw & BIT_OTP_SIGNATURE_ERR_TALYN_MB;
+
+ if (otp_signature_err &&
+ signature_status == WIL_SIG_STATUS_VANILLA) {
+ wil->boot_config = WIL_BOOT_VANILLA;
+ break;
+ }
+ if (otp_signature_err &&
+ signature_status == WIL_SIG_STATUS_DEVELOPMENT) {
+ wil->boot_config = WIL_BOOT_DEVELOPMENT;
+ break;
+ }
+ if (!otp_signature_err &&
+ signature_status == WIL_SIG_STATUS_PRODUCTION) {
+ wil->boot_config = WIL_BOOT_PRODUCTION;
+ break;
+ }
+ if (!otp_signature_err &&
+ signature_status ==
+ WIL_SIG_STATUS_CORRUPTED_PRODUCTION) {
+ /* Unrecognized OTP signature found. Possibly a
+ * corrupted production signature, access control
+ * is applied as in production mode, therefore
+ * do not fail
+ */
+ wil->boot_config = WIL_BOOT_PRODUCTION;
+ break;
+ }
+ if (delay++ > OTP_HW_COUNT)
+ break;
+
+ usleep_range(OTP_HW_DELAY, OTP_HW_DELAY + 10);
+ } while (!otp_signature_err && signature_status == 0);
+
+ if (wil->boot_config == WIL_BOOT_ERR) {
+ wil_err(wil,
+ "invalid boot config, signature_status %d otp_signature_err %d\n",
+ signature_status, otp_signature_err);
+ return -ETIME;
+ }
+
+ wil_dbg_misc(wil,
+ "signature test done in %d usec, otp_hw 0x%x, boot_config %d\n",
+ delay * OTP_HW_DELAY, otp_hw, wil->boot_config);
+
+ if (wil->boot_config == WIL_BOOT_VANILLA)
+ /* Assuming not SPI boot (currently not supported) */
+ goto out;
+
+ hw_section_done = otp_hw & BIT_OTP_HW_SECTION_DONE_TALYN_MB;
+ delay = 0;
+
+ while (!hw_section_done) {
+ msleep(RST_DELAY);
+
+ otp_hw = wil_r(wil, RGF_USER_OTP_HW_RD_MACHINE_1);
+ hw_section_done = otp_hw & BIT_OTP_HW_SECTION_DONE_TALYN_MB;
+
+ if (delay++ > RST_COUNT) {
+ wil_err(wil, "TO waiting for hw_section_done\n");
+ return -ETIME;
+ }
+ }
+
+ wil_dbg_misc(wil, "HW section done in %d ms\n", delay * RST_DELAY);
+
+ otp_qc_secured = wil_r(wil, RGF_OTP_QC_SECURED);
+ wil->secured_boot = otp_qc_secured & BIT_BOOT_FROM_ROM ? 1 : 0;
+ wil_dbg_misc(wil, "secured boot is %sabled\n",
+ wil->secured_boot ? "en" : "dis");
+
+out:
+ wil_dbg_misc(wil, "Reset completed\n");
+
+ return 0;
+}
+
+static int wil_target_reset(struct wil6210_priv *wil, int no_flash)
+{
+ u32 x;
+ int rc;
+
wil_dbg_misc(wil, "Resetting \"%s\"...\n", wil->hw_name);
/* Clear MAC link up */
@@ -901,34 +1056,12 @@ static int wil_target_reset(struct wil6210_priv *wil, int no_flash)
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
- /* wait until device ready. typical time is 20..80 msec */
- if (no_flash)
- do {
- msleep(RST_DELAY);
- x = wil_r(wil, USER_EXT_USER_PMU_3);
- if (delay++ > RST_COUNT) {
- wil_err(wil, "Reset not completed, PMU_3 0x%08x\n",
- x);
- return -ETIME;
- }
- } while ((x & BIT_PMU_DEVICE_RDY) == 0);
+ if (wil->hw_version == HW_VER_TALYN_MB)
+ rc = wil_wait_device_ready_talyn_mb(wil);
else
- do {
- msleep(RST_DELAY);
- x = wil_r(wil, RGF_USER_BL +
- offsetof(struct bl_dedicated_registers_v0,
- boot_loader_ready));
- if (x1 != x) {
- wil_dbg_misc(wil, "BL.ready 0x%08x => 0x%08x\n",
- x1, x);
- x1 = x;
- }
- if (delay++ > RST_COUNT) {
- wil_err(wil, "Reset not completed, bl.ready 0x%08x\n",
- x);
- return -ETIME;
- }
- } while (x != BL_READY);
+ rc = wil_wait_device_ready(wil, no_flash);
+ if (rc)
+ return rc;
wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
@@ -936,7 +1069,7 @@ static int wil_target_reset(struct wil6210_priv *wil, int no_flash)
wil_s(wil, RGF_DMA_OFUL_NID_0, BIT_DMA_OFUL_NID_0_RX_EXT_TR_EN |
BIT_DMA_OFUL_NID_0_RX_EXT_A3_SRC);
- if (no_flash) {
+ if (wil->hw_version < HW_VER_TALYN_MB && no_flash) {
/* Reset OTP HW vectors to fit 40MHz */
wil_w(wil, RGF_USER_XPM_IFC_RD_TIME1, 0x60001);
wil_w(wil, RGF_USER_XPM_IFC_RD_TIME2, 0x20027);
@@ -951,7 +1084,6 @@ static int wil_target_reset(struct wil6210_priv *wil, int no_flash)
wil_w(wil, RGF_USER_XPM_RD_DOUT_SAMPLE_TIME, 0x57);
}
- wil_dbg_misc(wil, "Reset completed in %d ms\n", delay * RST_DELAY);
return 0;
}
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index f8d4a2d..e639ba7 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -210,7 +210,9 @@ struct RGF_ICR {
#define RGF_USER_SPARROW_M_4 (0x880c50) /* Sparrow */
#define BIT_SPARROW_M_4_SEL_SLEEP_OR_REF BIT(2)
#define RGF_USER_OTP_HW_RD_MACHINE_1 (0x880ce0)
- #define BIT_NO_FLASH_INDICATION BIT(8)
+ #define BIT_OTP_SIGNATURE_ERR_TALYN_MB BIT(0)
+ #define BIT_OTP_HW_SECTION_DONE_TALYN_MB BIT(2)
+ #define BIT_NO_FLASH_INDICATION BIT(8)
#define RGF_USER_XPM_IFC_RD_TIME1 (0x880cec)
#define RGF_USER_XPM_IFC_RD_TIME2 (0x880cf0)
#define RGF_USER_XPM_IFC_RD_TIME3 (0x880cf4)
@@ -312,6 +314,9 @@ struct RGF_ICR {
#define RGF_CAF_PLL_LOCK_STATUS (0x88afec)
#define BIT_CAF_OSC_DIG_XTAL_STABLE BIT(0)
+#define RGF_OTP_QC_SECURED (0x8a0038)
+ #define BIT_BOOT_FROM_ROM BIT(31)
+
/* eDMA */
#define RGF_INT_COUNT_ON_SPECIAL_EVT (0x8b62d8)
@@ -969,6 +974,8 @@ struct wil6210_priv {
u32 rx_buff_id_count;
bool amsdu_en;
bool use_rx_hw_reordering;
+ bool secured_boot;
+ u8 boot_config;
};
#define wil_to_wiphy(i) (i->wiphy)
--
1.9.1
