Search Linux Wireless

Re: [PATCH 2/2] ath10k: support MAC address randomization in scan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Carl,

On Fri, Mar 30, 2018 at 11:14:00AM +0800, Carl Huang wrote:
> The ath10k reports the random_mac_addr capability to upper layer
> based on the service bit firmware reported. Driver sets the
> spoofed flag in scan_ctrl_flag to firmware if upper layer has
> enabled this feature in scan request.
> 
> Test with QCA6174 hw3.0 and firmware-6.bin_WLAN.RM.4.4.1-00102-QCARMSWP-1,
> but QCA9377 is also affected.
> 
> Signed-off-by: Carl Huang <cjhuang@xxxxxxxxxxxxxx>
> ---
>  drivers/net/wireless/ath/ath10k/mac.c     | 17 +++++++++++++++++
>  drivers/net/wireless/ath/ath10k/wmi-ops.h | 22 ++++++++++++++++++++++
>  drivers/net/wireless/ath/ath10k/wmi-tlv.c | 25 +++++++++++++++++++++++++
>  drivers/net/wireless/ath/ath10k/wmi-tlv.h | 11 +++++++++++
>  drivers/net/wireless/ath/ath10k/wmi.c     |  5 +++++
>  drivers/net/wireless/ath/ath10k/wmi.h     |  9 +++++++++
>  6 files changed, 89 insertions(+)
> 
> diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
> index ebb3f1b..c5cd5e5 100644
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -5699,6 +5699,12 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw,
>  		arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
>  	}
>  
> +	if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
> +		arg.scan_ctrl_flags |=  WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ;
> +		ether_addr_copy(arg.mac_addr.addr, req->mac_addr);
> +		ether_addr_copy(arg.mac_mask.addr, req->mac_addr_mask);
> +	}
> +
>  	if (req->n_channels) {
>  		arg.n_channels = req->n_channels;
>  		for (i = 0; i < arg.n_channels; i++)
> @@ -8397,6 +8403,17 @@ int ath10k_mac_register(struct ath10k *ar)
>  		goto err_dfs_detector_exit;
>  	}
>  
> +	if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) {
> +		ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr);
> +		if (ret) {
> +			ath10k_err(ar, "failed to set prob req oui: %i\n", ret);
> +			goto err_dfs_detector_exit;
> +		}
> +
> +		ar->hw->wiphy->features |=
> +			NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;

Do you support NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR too?

> +	}
> +


Brian



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux