From: Zhi Chen <zhichen@xxxxxxxxxxxxxx> The 5ghz channel parameters of TLV target wasn't passed to host, it caused host can only use lower channels from 36 to 64. Signed-off-by: Zhi Chen <zhichen@xxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 25efbb5..b8985ce 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -1010,6 +1010,8 @@ static int ath10k_wmi_tlv_op_pull_svc_rdy_ev(struct ath10k *ar, arg->phy_capab = ev->phy_capability; arg->num_rf_chains = ev->num_rf_chains; arg->eeprom_rd = reg->eeprom_rd; + arg->low_5ghz_chan = reg->low_5ghz_chan; + arg->high_5ghz_chan = reg->high_5ghz_chan; arg->num_mem_reqs = ev->num_mem_reqs; arg->service_map = svc_bmap; arg->service_map_len = ath10k_wmi_tlv_len(svc_bmap); -- 2.1.4
