Remove unnecessary MT_TX_ALC_CFG_4 configuration since the register value will be properly set according to the usage of an external power amplifier Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx> --- Changes since v1: - remove first initialization in order to have the writes to that register grouped together in the same if/else chunk --- drivers/net/wireless/mediatek/mt76/mt76x2_phy.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c b/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c index f28c55746cea..42414c5fa01e 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c @@ -257,7 +257,6 @@ mt76x2_phy_set_txpower_regs(struct mt76x2_dev *dev, enum nl80211_band band) mt76_wr(dev, MT_TX_ALC_CFG_2, 0x1b0f0400); mt76_wr(dev, MT_TX_ALC_CFG_3, 0x1b0f0476); } - mt76_wr(dev, MT_TX_ALC_CFG_4, 0); if (mt76x2_ext_pa_enabled(dev, band)) pa_mode_adj = 0x04000000; -- 2.16.3
