On Thu, Mar 01, 2018 at 04:30:10PM +0100, Daniel Golle wrote: > [forwarding to all other involved players] > > On Thu, Mar 01, 2018 at 05:50:51PM +0300, Jamie Stuart wrote: > > Hi Daniel, > > The driver seems much improved after this fix. > > it's about those two > [PATCH 1/2] rt2x00: pause almost full queue early > [PATCH 2/2] rt2x00: do not pause queue unconditionally on error path > > > Under very heavy load (30 clients downloading multi-GB files from SD card on the server concurrently), wifi dies with errors: This is some testbed? Could you share how did you setup such environment and what are client devices ? > > [ 7794.230376] ieee80211 phy0: rt2x00lib_rxdone_read_signal: Warning - Frame received with unrecognized signal, mode=0x0001, signal=0x010c, type=4 This is indicator that HW/FW has a problem. There could be various reasons for that. One possible I can also observe in my setup,is strange mishmash of seq on frames which were not acked in BlockACK and had to be resent. This can happen when many frames are wrongly decoded (i.e. when there is bad radio condition or we have not correct low level RF/BBP setup for a Ralink device). To mitigate that problem we can limit length of agreggeted AMPDU frame. I attached two patches which do that. One for RX side second for TX side. Please check if they make a diffrent. You can also hardcode ba_size = 0 for those 30 clients setup. Note the patches can cause (possibly small) perfromance degradation on good setups. Mathias, could you check them as well and see if they do not cause performance regression on your device ? Lastly when I changed ba_size setting, it was a problem on your setup. > > Thu Mar 1 16:36:47 2018 kern.err kernel: [ 8702.146403] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2 > > Thu Mar 1 16:36:47 2018 kern.err kernel: [ 8702.146403] Please file bug report to http://rt2x00.serialmonkey.com > > Thu Mar 1 16:36:48 2018 kern.err kernel: [ 8702.288149] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2 > > Thu Mar 1 16:36:48 2018 kern.err kernel: [ 8702.288149] Please file bug report to http://rt2x00.serialmonkey.com > > Thu Mar 1 16:36:48 2018 kern.err kernel: [ 8702.380761] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2 > > Thu Mar 1 16:36:48 2018 kern.err kernel: [ 8702.380761] Please file bug report to http://rt2x00.serialmonkey.com For those errors I recommend to remove 600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch patch. Whould be good if OpenWRT developers could apply this patch only on target where it is really needed, not for all rt2800 devices. Thanks Stanislaw
