The regdomain code is used to select the correct the correct conformance
test limits (CTL) for a country. If the regdomain code isn't available and
it is still programmed in the EEPROM then it will cause an error and stop
the initialization with:
Invalid EEPROM contents
The current CTL mappings for this regdomain code are:
* 2.4GHz: ETSI
* 5GHz: FCC
Signed-off-by: Sven Eckelmann <sven.eckelmann@xxxxxxxxxxxx>
---
drivers/net/wireless/ath/regd_common.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h
index f1735ac67c52..447547c25093 100644
--- a/drivers/net/wireless/ath/regd_common.h
+++ b/drivers/net/wireless/ath/regd_common.h
@@ -35,6 +35,7 @@ enum EnumRd {
FRANCE_RES = 0x31,
FCC3_FCCA = 0x3A,
FCC3_WORLD = 0x3B,
+ FCC3_ETSIC = 0x3F,
ETSI1_WORLD = 0x37,
ETSI3_ETSIA = 0x32,
@@ -174,6 +175,7 @@ static struct reg_dmn_pair_mapping regDomainPairs[] = {
{FCC2_ETSIC, CTL_FCC, CTL_ETSI},
{FCC3_FCCA, CTL_FCC, CTL_FCC},
{FCC3_WORLD, CTL_FCC, CTL_ETSI},
+ {FCC3_ETSIC, CTL_FCC, CTL_ETSI},
{FCC4_FCCA, CTL_FCC, CTL_FCC},
{FCC5_FCCA, CTL_FCC, CTL_FCC},
{FCC6_FCCA, CTL_FCC, CTL_FCC},
--
2.11.0
