The regdomain code is used to select the correct the correct conformance
test limits (CTL) for a country. If the regdomain code isn't available and
it is still programmed in the EEPROM then it will cause an error and stop
the initialization with:
Invalid EEPROM contents
The current CTL mappings for this regdomain code are:
* 2.4GHz: ETSI
* 5GHz: ETSI
Signed-off-by: Sven Eckelmann <sven.eckelmann@xxxxxxxxxxxx>
---
drivers/net/wireless/ath/regd_common.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h
index 44e3831c13b1..14332b84443b 100644
--- a/drivers/net/wireless/ath/regd_common.h
+++ b/drivers/net/wireless/ath/regd_common.h
@@ -68,6 +68,7 @@ enum EnumRd {
APL1_ETSIC = 0x55,
APL2_ETSIC = 0x56,
APL5_WORLD = 0x58,
+ APL13_WORLD = 0x5A,
APL6_WORLD = 0x5B,
APL7_FCCA = 0x5C,
APL8_WORLD = 0x5D,
@@ -195,6 +196,7 @@ static struct reg_dmn_pair_mapping regDomainPairs[] = {
{APL3_WORLD, CTL_FCC, CTL_ETSI},
{APL4_WORLD, CTL_FCC, CTL_ETSI},
{APL5_WORLD, CTL_FCC, CTL_ETSI},
+ {APL13_WORLD, CTL_ETSI, CTL_ETSI},
{APL6_WORLD, CTL_ETSI, CTL_ETSI},
{APL8_WORLD, CTL_ETSI, CTL_ETSI},
{APL9_WORLD, CTL_ETSI, CTL_ETSI},
--
2.11.0
