Search Linux Wireless

Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 26, 2018 at 12:44 AM, <s.gottschall@xxxxxxxxxx> wrote:
>
> From: Sebastian Gottschall <s.gottschall@xxxxxxxxxxxxxxx>
>
> Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based chipsets with on chipset connected led's
> using WMI Firmware API.
> The LED device will get available named as "ath10k-phyX" at sysfs and can be controlled with various triggers.
> adds also debugfs interface for gpio control.
>
> Signed-off-by: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
>
> v2  add correct gpio count per chipset and remove IPQ4019 support since this chipset does not make use of specific gpios)
> v5  fix compiling without LED_CLASS and GPIOLIB support, fix also error by kbuild test robot which does not occur in standard builds. curious
> v6  correct return values and fix comment style
> v7  fix ath10k_unregister_led for compiling without LED_CLASS
> v8  fix various code design issues reported by reviewers
> v9  move led and led code to separate sourcefile (gpio.c)
> v10 compile fix if gpiolib isnt included
> v11 make register_gpio_chip static. advise by krobot
> v12 fix warning
> ---
>  drivers/net/wireless/ath/ath10k/Kconfig   |  10 ++
>  drivers/net/wireless/ath/ath10k/Makefile  |   1 +
>  drivers/net/wireless/ath/ath10k/core.c    |  28 ++++-
>  drivers/net/wireless/ath/ath10k/core.h    |  62 +++++++++-
>  drivers/net/wireless/ath/ath10k/debug.c   | 146 ++++++++++++++++++++++
>  drivers/net/wireless/ath/ath10k/gpio.c    | 196 ++++++++++++++++++++++++++++++
>  drivers/net/wireless/ath/ath10k/hw.h      |   2 +
>  drivers/net/wireless/ath/ath10k/mac.c     |   5 +
>  drivers/net/wireless/ath/ath10k/wmi-ops.h |  36 +++++-
>  drivers/net/wireless/ath/ath10k/wmi-tlv.c |  65 ++++++++++
>  drivers/net/wireless/ath/ath10k/wmi.c     |  46 +++++++
>  drivers/net/wireless/ath/ath10k/wmi.h     |  36 ++++++
>  12 files changed, 630 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/net/wireless/ath/ath10k/gpio.c


Assuming that kbuild robot doesn't kick back another build-time
warning, it looks OK to me.

Reviewed-by: Steve deRosier <derosier@xxxxxxxxxxxxxx>

--
Steve deRosier
Cal-Sierra Consulting LLC
https://www.cal-sierra.com/



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux