Ack timing generation has to be adapted for 5/10 MHz channels.
Do it by properly initializing ack shift field in TXSIFS
register. Ack shift assumes channel width of 2.5 Hhz so
value zero means 2.5 MHz, 1 is 5 MHz and so on.
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/hw.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 3017078..6b37036 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1038,7 +1038,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
int acktimeout, ctstimeout, ack_offset = 0;
int slottime;
int sifstime;
- int rx_lat = 0, tx_lat = 0, eifs = 0;
+ int rx_lat = 0, tx_lat = 0, eifs = 0, ack_shift = 0;
u32 reg;
ath_dbg(ath9k_hw_common(ah), RESET, "ah->misc_mode 0x%x\n",
@@ -1070,6 +1070,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
sifstime = 32;
ack_offset = 16;
+ ack_shift = 3;
slottime = 13;
} else if (IS_CHAN_QUARTER_RATE(chan)) {
eifs = 340;
@@ -1080,6 +1081,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
sifstime = 64;
ack_offset = 32;
+ ack_shift = 1;
slottime = 21;
} else {
if (AR_SREV_9287(ah) && AR_SREV_9287_13_OR_LATER(ah)) {
@@ -1136,6 +1138,10 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
SM(tx_lat, AR_USEC_TX_LAT),
AR_USEC_TX_LAT | AR_USEC_RX_LAT | AR_USEC_USEC);
+ if (IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))
+ REG_RMW(ah, AR_TXSIFS,
+ sifstime | SM(ack_shift, AR_TXSIFS_ACK_SHIFT),
+ (AR_TXSIFS_TIME | AR_TXSIFS_ACK_SHIFT));
}
EXPORT_SYMBOL(ath9k_hw_init_global_settings);
--
2.7.4
