From: Ron Rindjunsky <ron.rindjunsky@xxxxxxxxx>
This patch adds module param 11n_disable to allow configuration of 11n
capabilities. The default value of this param is 11n enabled (value 0).
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@xxxxxxxxx>
Signed-off-by: Tomas Winkler <tomas.winkler@xxxxxxxxx>
Signed-off-by: Zhu Yi <yi.zhu@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/iwl-4965.c | 8 +++++++-
drivers/net/wireless/iwlwifi/iwl-5000.c | 2 ++
drivers/net/wireless/iwlwifi/iwl-core.c | 16 ++++++++++++----
drivers/net/wireless/iwlwifi/iwl-core.h | 1 +
4 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 7f6713f..e4eab51 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2075,6 +2075,9 @@ int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw,
IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n",
print_mac(mac, addr), tid);
+ if (!(priv->cfg->sku & IWL_SKU_N))
+ return -EACCES;
+
switch (action) {
case IEEE80211_AMPDU_RX_START:
IWL_DEBUG_HT("start Rx\n");
@@ -2457,11 +2460,14 @@ MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, 0444);
MODULE_PARM_DESC(queues_num, "number of hw queues.");
-
/* QoS */
module_param_named(qos_enable, iwl4965_mod_params.enable_qos, int, 0444);
MODULE_PARM_DESC(qos_enable, "enable all QoS functionality");
+/* 11n */
+module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, 0444);
+MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, int, 0444);
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
+
module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, 0444);
MODULE_PARM_DESC(fw_restart4965, "restart firmware in case of error");
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 75283fb..099983f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1540,6 +1540,8 @@ module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, 0444);
MODULE_PARM_DESC(queues_num50, "number of hw queues in 50xx series");
module_param_named(qos_enable50, iwl50_mod_params.enable_qos, int, 0444);
MODULE_PARM_DESC(qos_enable50, "enable all 50XX QoS functionality");
+module_param_named(11n_disable50, iwl50_mod_params.disable_11n, int, 0444);
+MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality");
module_param_named(amsdu_size_8K50, iwl50_mod_params.amsdu_size_8K, int, 0444);
MODULE_PARM_DESC(amsdu_size_8K50, "enable 8K amsdu size in 50XX series");
module_param_named(fw_restart50, iwl50_mod_params.restart_fw, int, 0444);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 97447df..08a42a7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -495,7 +495,9 @@ static int iwlcore_init_geos(struct iwl_priv *priv)
sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
- iwlcore_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_5GHZ);
+ if (priv->cfg->sku & IWL_SKU_N)
+ iwlcore_init_ht_hw_capab(priv, &sband->ht_info,
+ IEEE80211_BAND_5GHZ);
sband = &priv->bands[IEEE80211_BAND_2GHZ];
sband->channels = channels;
@@ -503,7 +505,9 @@ static int iwlcore_init_geos(struct iwl_priv *priv)
sband->bitrates = rates;
sband->n_bitrates = IWL_RATE_COUNT;
- iwlcore_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_2GHZ);
+ if (priv->cfg->sku & IWL_SKU_N)
+ iwlcore_init_ht_hw_capab(priv, &sband->ht_info,
+ IEEE80211_BAND_2GHZ);
priv->ieee_channels = channels;
priv->ieee_rates = rates;
@@ -819,8 +823,9 @@ int iwl_setup_mac(struct iwl_priv *priv)
IEEE80211_HW_NOISE_DBM;
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
- /* Enhanced value; more queues, to support 11n aggregation */
- hw->ampdu_queues = 12;
+ /* queues to support 11n aggregation */
+ if (priv->cfg->sku & IWL_SKU_N)
+ hw->ampdu_queues = 12;
hw->conf.beacon_int = 100;
@@ -853,6 +858,9 @@ int iwl_set_hw_params(struct iwl_priv *priv)
priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
+ if (priv->cfg->mod_params->disable_11n)
+ priv->cfg->sku &= ~IWL_SKU_N;
+
/* Device-specific setup */
return priv->cfg->ops->lib->set_hw_params(priv);
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index f156d27..d7562c3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -159,6 +159,7 @@ struct iwl_mod_params {
int disable_hw_scan; /* def: 0 = use h/w scan */
int num_of_queues; /* def: HW dependent */
int enable_qos; /* def: 1 = use quality of service */
+ int disable_11n; /* def: 0 = disable 11n capabilities */
int amsdu_size_8K; /* def: 1 = enable 8K amsdu size */
int antenna; /* def: 0 = both antennas (use diversity) */
int restart_fw; /* def: 1 = restart firmware */
--
1.5.3.6
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
