Some modern Ubiquiti devices contain a rebranded QCA988X rev2 with
a custom Ubiquiti vendor and device id. This patch adds support for
those devices, treating them as a QCA988X v2.
Signed-off-by: Tobias Schramm <tobleminer@xxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/core.c | 24 ++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/hw.h | 1 +
drivers/net/wireless/ath/ath10k/pci.c | 4 ++++
3 files changed, 29 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index b29fdbd21ead..9fb38f2c1d6e 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -52,6 +52,30 @@ MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
static const struct ath10k_hw_params ath10k_hw_params_list[] = {
+ {
+ .id = QCA988X_HW_2_0_VERSION,
+ .dev_id = QCA988X_2_0_DEVICE_ID_UBNT,
+ .name = "qca988x hw2.0",
+ .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
+ .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+ .cal_data_len = 2116,
+ .fw = {
+ .dir = QCA988X_HW_2_0_FW_DIR,
+ .board = QCA988X_HW_2_0_BOARD_DATA_FILE,
+ .board_size = QCA988X_BOARD_DATA_SZ,
+ .board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
+ },
+ .hw_ops = &qca988x_ops,
+ .decap_align_bytes = 4,
+ .spectral_bin_discard = 0,
+ .vht160_mcs_rx_highest = 0,
+ .vht160_mcs_tx_highest = 0,
+ .n_cipher_suites = 8,
+ },
{
.id = QCA988X_HW_2_0_VERSION,
.dev_id = QCA988X_2_0_DEVICE_ID,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 05f26e5858ad..5ae3b56acc19 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -22,6 +22,7 @@
#define ATH10K_FW_DIR "ath10k"
+#define QCA988X_2_0_DEVICE_ID_UBNT (0x11ac)
#define QCA988X_2_0_DEVICE_ID (0x003c)
#define QCA6164_2_1_DEVICE_ID (0x0041)
#define QCA6174_2_1_DEVICE_ID (0x003e)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index ffea348b2190..e28e2f5f09c5 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -52,6 +52,7 @@ MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
#define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3
static const struct pci_device_id ath10k_pci_id_table[] = {
+ { PCI_VDEVICE(UBIQUITI, QCA988X_2_0_DEVICE_ID_UBNT) }, /* PCI-E QCA988X V2 (Ubiquiti branded) */
{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
{ PCI_VDEVICE(ATHEROS, QCA6164_2_1_DEVICE_ID) }, /* PCI-E QCA6164 V2.1 */
{ PCI_VDEVICE(ATHEROS, QCA6174_2_1_DEVICE_ID) }, /* PCI-E QCA6174 V2.1 */
@@ -68,6 +69,7 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
* hacks. ath10k doesn't have them and these devices crash horribly
* because of that.
*/
+ { QCA988X_2_0_DEVICE_ID_UBNT, QCA988X_HW_2_0_CHIP_ID_REV },
{ QCA988X_2_0_DEVICE_ID, QCA988X_HW_2_0_CHIP_ID_REV },
{ QCA6164_2_1_DEVICE_ID, QCA6174_HW_2_1_CHIP_ID_REV },
@@ -1977,6 +1979,7 @@ static int ath10k_pci_get_num_banks(struct ath10k *ar)
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
switch (ar_pci->pdev->device) {
+ case QCA988X_2_0_DEVICE_ID_UBNT:
case QCA988X_2_0_DEVICE_ID:
case QCA99X0_2_0_DEVICE_ID:
case QCA9888_2_0_DEVICE_ID:
@@ -3208,6 +3211,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
switch (pci_dev->device) {
+ case QCA988X_2_0_DEVICE_ID_UBNT:
case QCA988X_2_0_DEVICE_ID:
hw_rev = ATH10K_HW_QCA988X;
pci_ps = false;
--
2.16.0
