Search Linux Wireless

RE: [EXT] Re: [2/2] mwifiex: use more_rx_task_flag to avoid USB RX stall

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kalle,

> ----------------------------------------------------------------------
> Kalle Valo <kvalo@xxxxxxxxxxxxxx> writes:
>
> > Ganapathi Bhat <gbhat@xxxxxxxxxxx> wrote:
> >
> >> From: Shrenik Shikhare <shrenik@xxxxxxxxxxx>
> >>
> >> There is a race condition for acquiring rx_proc_lock between rx
> >> worker thread and USB RX data interrupt
> >> (mwifiex_usb_rx_complete):
> >>
> >> 1. USB receives an RX data interrupt, queues rx_work 2. rx_work
> >> empties rx_data_q, tries to acquire rx_proc_lock (to clear
> >> rx_processing flag) 3. While #2 is yet to acquire rx_proc_lock,
> >> driver receives continuous RX data interupts(mwifiex_usb_rx_complete)
> >> 3. For each interrupt at #3, driver acquires rx_proc_lock(it gets the
> >> lock since it is in interrupt context), tries to queue rx_work, but
> >> fails to do so since rx_processing is still set(#2) 4. When
> >> rx_pending exceeds HIGH_RX_PENDING, driver stops submitting URBs
> back
> >> to USB subsystem and thus firmware stops uploading RX data to driver
> >> 5. Now finally #2 will acquire rx_proc_lock, but because of #4, there
> >> are no further triggers to schedule rx_work again
> >>
> >> The above scenario occurs in some platforms where the RX processing
> >> is comparitively slower. This results in RX stall in driver,
> >> command/TX timeouts in firmware. The above scenario is introduced
> >> after commit c7dbdcb2a4e1
> >> ("mwifiex: schedule rx_work on RX interrupt for USB")
> >>
> >> To fix this set a new more_rx_task_flag whenever RX data callback is
> >> trying to schedule rx_work but rx_processing is not yet cleared. This
> >> will let the current rx_work(which was waiting for
> >> rx_proc_lock) to loopback and process newly arrived RX packets.
> >>
> >> Signed-off-by: Cathy Luo <cluo@xxxxxxxxxxx>
> >> Signed-off-by: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
> >
> > I can't find any commit with id c7dbdcb2a4e1, is it correct?
>
> Oh, and please use Fixes line to mark the commit which broke this.
Ok Sure.  I will do that and send v2.
>
> --
> Kalle Valo
Regards,
Ganapathi



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux