Search Linux Wireless

sdio failure to initialize on warm boot.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>:
> On 1/12/2018 9:18 PM, Kyle Evans wrote:
> > 2) After reboot I get this nasty error...
> > [    0.000000] Kernel command line: console=tty0 selinux=0
> > video=1280x800 root=/dev/mmcblk1p1 brcmfmac.bebug=0x20000
> > [    2.269750] mmc0: Invalid maximum block size, assuming 512 bytes
> > [    2.330010] mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci]
> > using ADMA
> > [    2.645242] mmc0: error -110 whilst initialising SDIO card
> 
> Ok. I suppose you mean a warm reboot. So I suppose the card is not 
> properly power cycled. If your SDHCI controller driver (is it 
> sdhci-acpi?) is loaded as a module, you could try to unload it and load 
> it again. Let me know if that works for you to confirm my guess.

Your guess is correct. The following brings up wifi after failure to do 
so during warm boot.

modprobe -r sdhci-tegra; modprobe sdhci-tegra;

-Kyle



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux