On 01/08/2018 07:40 PM, Jia-Ju Bai wrote:
b43_radio_2057_init_post is not called in an interrupt handler
nor holding a spinlock.
The function mdelay in it can be replaced with usleep_range,
to reduce busy wait.
Signed-off-by: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
---
v2:
* Replace mdelay with usleep_range, instead of msleep in v1.
Thank Larry for good advice.
---
I agree that a sleep of 2-3 ms should be OK here.
Acked-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Larry
drivers/net/wireless/broadcom/b43/phy_n.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/b43/phy_n.c b/drivers/net/wireless/broadcom/b43/phy_n.c
index a5557d7..f2a2f41 100644
--- a/drivers/net/wireless/broadcom/b43/phy_n.c
+++ b/drivers/net/wireless/broadcom/b43/phy_n.c
@@ -1031,7 +1031,7 @@ static void b43_radio_2057_init_post(struct b43_wldev *dev)
b43_radio_set(dev, R2057_RFPLL_MISC_CAL_RESETN, 0x78);
b43_radio_set(dev, R2057_XTAL_CONFIG2, 0x80);
- mdelay(2);
+ usleep_range(2000, 3000);
b43_radio_mask(dev, R2057_RFPLL_MISC_CAL_RESETN, ~0x78);
b43_radio_mask(dev, R2057_XTAL_CONFIG2, ~0x80);
