Search Linux Wireless

[PATCH 08/11] brcmfmac: Clean up interrupt macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ian Molton <ian@xxxxxxxxxxxxxx>

Make it more obvious that this code acually enables interrupts, and
provide nice definitions for the bits in the register.

Signed-off-by: Ian Molton <ian@xxxxxxxxxxxxxx>
Acked-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 3 ++-
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 8 +++++---
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index d357c5c..e3366ab 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -149,7 +149,8 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 
 		/* must configure SDIO_CCCR_IENx to enable irq */
 		data = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_IENx, &ret);
-		data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
+		data |= SDIO_CCCR_IEN_FUNC1 | SDIO_CCCR_IEN_FUNC2 |
+			SDIO_CCCR_IEN_FUNC0;
 		brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, data, &ret);
 
 		/* redirect, configure and enable io for interrupt signal */
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index 54a0303..04661ec 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -24,9 +24,6 @@
 /* Maximum number of I/O funcs */
 #define NUM_SDIO_FUNCS	3
 
-#define SDIO_FUNC_1		1
-#define SDIO_FUNC_2		2
-
 #define SDIOD_FBR_SIZE		0x100
 
 /* io_en */
@@ -52,6 +49,11 @@
 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT	BIT(2)
 #define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC	BIT(3)
 
+/* Interrupt enable bits for each function */
+#define SDIO_CCCR_IEN_FUNC0			BIT(0)
+#define SDIO_CCCR_IEN_FUNC1			BIT(1)
+#define SDIO_CCCR_IEN_FUNC2			BIT(2)
+
 #define SDIO_CCCR_BRCM_CARDCTRL			0xf1
 #define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET	BIT(1)
 
-- 
1.9.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux