Search Linux Wireless

Re: ath10k: handling qos at STA side based on AP WMM enable/disable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



bpothuno@xxxxxxxxxxxxxxxx wrote:

> Data packets are not sent by STA in case of STA joined to
> non QOS AP (WMM disabled AP). This is happening because of STA
> is sending data packets to firmware from host with qos enabled
> along with non qos queue value(TID = 16).
> Due to qos enabled, firmware is discarding the packet.
> 
> This patch fixes this issue by updating the qos based on station
> WME capability field if WMM is disabled in AP.
> 
> This patch is required by 10.4 family chipsets like
> QCA4019/QCA9888/QCA9884/QCA99X0.
> Firmware Versoin : 10.4-3.5.1-00018.
> 
> For 10.2.4 family chipsets QCA988X/QCA9887 and QCA6174 this patch
> has no effect.
> 
> Signed-off-by: Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxxxx>
> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxxxx>

Patch applied to ath-next branch of ath.git, thanks.

07ffb4497360 ath10k: handling qos at STA side based on AP WMM enable/disable

-- 
https://patchwork.kernel.org/patch/10079089/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux