On Fri, Dec 08, 2017 at 11:37:41AM +0100, Sven Eckelmann wrote: > The bus + bmi-chip-id + bmi-board-id is not enough to identify the correct > board data file on QCA4019 based devices. Multiple different boards share > the same values. Only the original reference designs can currently be > identified and loaded from the board-2.bin. But these will not result in > the correct calibration data when combined with the pre-calibration data > from the device. > > An additional "variant" information has to be provided (via SMBIOS or DT) > to select the correct board data for a design which was modified by an ODM. > > Signed-off-by: Sven Eckelmann <sven.eckelmann@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 3 +++ > 1 file changed, 3 insertions(+) Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
