On Montag, 11. Dezember 2017 18:50:09 CET akolli@xxxxxxxxxxxxxx wrote: [...] > >> > Just tried this on an QCA9984 which doesn't seem to have the > >> > calibration data in the PCI EEPROM. > >> > > >> > [ 71.728929] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 > >> > target 0x01000000 chip_id 0x00000000 sub 168c:cafe > >> > [ 71.732926] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 > >> > tracing 0 dfs 1 testmode 1 > >> > [ 71.752282] ath10k_pci 0000:01:00.0: firmware ver > >> > 10.4-ct-9984-fW-009-dfa0083 api 5 features peer-flow-ctrl crc32 > >> > 7198d117 > >> > [ 73.805730] ath10k_pci 0000:01:00.0: unable to read from the > >> > device > >> > [ 73.805769] ath10k_pci 0000:01:00.0: could not execute otp for > >> > board id check: -110 [...] > > I tested this on QCA9984 and it worked with below config, [...] > > Kindly try with the latest firmware from Kalle's git mentioned above. This didn't change the behavior. It was actually the OTP timeout problem on the QCA9984 which Ben Greear fixed [1]. Luckily, LEDE added this patch with your patch [2] Kind regards, Sven [1] https://git.lede-project.org/?p=source.git;a=blob;f=package/kernel/mac80211/patches/327-ath10k-increase-BMI-timeout.patch;h=c9f493bcd8fe29afe1e08dc31b6370507b95fc72;hb=025cb640cdf27f7c68fc1d89d0698605daa06c43 [2] https://git.lede-project.org/?p=source.git;a=commit;h=025cb640cdf27f7c68fc1d89d0698605daa06c43
Attachment:
signature.asc
Description: This is a digitally signed message part.
