Since driver does not report hardware dynamic power saving cap,
this is up to the mac80211 to manage power saving timeout and
state machine, using the ieee80211 config callback to report
PS changes. This patch enables/disables PS mode according to
the new configuration.
Remove old behaviour enabling PS mode in a static way, this make
the device unusable when power save is enabled since device is
forced to PS regardless RX/TX traffic.
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
---
drivers/net/wireless/ath/wcn36xx/main.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index f0b4d43..436b8ea 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -384,6 +384,18 @@ static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
}
}
+ if (changed & IEEE80211_CONF_CHANGE_PS) {
+ list_for_each_entry(tmp, &wcn->vif_list, list) {
+ vif = wcn36xx_priv_to_vif(tmp);
+ if (hw->conf.flags & IEEE80211_CONF_PS) {
+ if (vif->bss_conf.ps) /* ps allowed ? */
+ wcn36xx_pmc_enter_bmps_state(wcn, vif);
+ } else {
+ wcn36xx_pmc_exit_bmps_state(wcn, vif);
+ }
+ }
+ }
+
mutex_unlock(&wcn->conf_mutex);
return 0;
@@ -747,17 +759,6 @@ static void wcn36xx_bss_info_changed(struct ieee80211_hw *hw,
vif_priv->dtim_period = bss_conf->dtim_period;
}
- if (changed & BSS_CHANGED_PS) {
- wcn36xx_dbg(WCN36XX_DBG_MAC,
- "mac bss PS set %d\n",
- bss_conf->ps);
- if (bss_conf->ps) {
- wcn36xx_pmc_enter_bmps_state(wcn, vif);
- } else {
- wcn36xx_pmc_exit_bmps_state(wcn, vif);
- }
- }
-
if (changed & BSS_CHANGED_BSSID) {
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac bss changed_bssid %pM\n",
bss_conf->bssid);
--
2.7.4
