Hello, dmesg: [17361.733330] iwlwifi 0000:01:00.0: fail to flush all tx fifo queues Q 0 [17361.733401] iwlwifi 0000:01:00.0: Queue 0 is active on fifo 3 and stuck for 0 ms. SW [72, 73] HW [72, 73] FH TRB=0x080300048 Regards, -- Cristian
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Samsung Electronics Co Ltd 2nd Generation Core Processor Family DRAM Controller [144d:c0d7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Samsung Electronics Co Ltd 2nd Generation Core Processor Family Integrated Graphics Controller [144d:c0d7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0800c Data: 41e1 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Samsung Electronics Co Ltd 7 Series/C210 Series Chipset Family USB xHCI Host Controller [144d:c0d7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 24 Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=64K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+ Address: 00000000fee0200c Data: 41b1 Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: Samsung Electronics Co Ltd 7 Series/C216 Chipset Family MEI Controller [144d:c0d7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 28 Region 0: Memory at f0615000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 4122 Kernel driver in use: mei_me Kernel modules: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd 7 Series/C216 Chipset Family USB Enhanced Host Controller [144d:c0d7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f061a000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: Samsung Electronics Co Ltd 7 Series/C216 Chipset Family High Definition Audio Controller [144d:c0d7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: Memory at f0610000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0e00c Data: 4162 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: f0500000-f05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Samsung Electronics Co Ltd 7 Series/C216 Chipset Family PCI Express Root Port 1 [144d:c0d7] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Prefetchable memory behind bridge: 00000000f0400000-00000000f04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #3, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Samsung Electronics Co Ltd 7 Series/C216 Chipset Family PCI Express Root Port 4 [144d:c0d7] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd 7 Series/C216 Chipset Family USB Enhanced Host Controller [144d:c0d7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f0619000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP+ Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) Subsystem: Samsung Electronics Co Ltd HM76 Express Chipset LPC Controller [144d:c0d7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Samsung Electronics Co Ltd 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [144d:c0d7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 25 Region 0: I/O ports at 3088 [size=8] Region 1: I/O ports at 3094 [size=4] Region 2: I/O ports at 3080 [size=8] Region 3: I/O ports at 3090 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at f0618000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0400c Data: 41c1 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller [8086:1e22] (rev 04) Subsystem: Samsung Electronics Co Ltd 7 Series/C216 Chipset Family SMBus Controller [144d:c0d7] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 7 Region 0: Memory at f0614000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] Kernel modules: i2c_i801 01:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088e] (rev 24) Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0800c Data: 4142 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <32us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number c4-85-08-ff-ff-6c-01-06 Kernel driver in use: iwlwifi Kernel modules: iwlwifi 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: Samsung Electronics Co Ltd RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [144d:c0d7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at 2000 [size=256] Region 2: Memory at f0404000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f0400000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 41d1 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data Not readable Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00 Kernel driver in use: r8169 Kernel modules: r8169
[ 0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12 [ 0.000000] Linux version 4.15.0-041500rc2-generic (kernel@gloin) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #201712031230 SMP Sun Dec 3 17:32:03 UTC 2017 [ 0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-4.15.0-041500rc2-generic root=UUID=707d0f89-4b1d-4432-9d50-6058dc4c1ee9 ro rootflags=subvol=@ quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000c42a9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c42aa000-0x00000000c44abfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c44ac000-0x00000000d33eefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d33ef000-0x00000000daeeefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031f5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000031f600000-0x000000031f7fffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C/SAMSUNG_NP1234567890, BIOS P14AAJ 04/15/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x31f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask F00000000 write-back [ 0.000000] 8 base 300000000 mask FE0000000 write-back [ 0.000000] 9 base 31F800000 mask FFF800000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x710b8000, 0x710b8fff] PGTABLE [ 0.000000] BRK [0x710b9000, 0x710b9fff] PGTABLE [ 0.000000] BRK [0x710ba000, 0x710bafff] PGTABLE [ 0.000000] BRK [0x710bb000, 0x710bbfff] PGTABLE [ 0.000000] BRK [0x710bc000, 0x710bcfff] PGTABLE [ 0.000000] BRK [0x710bd000, 0x710bdfff] PGTABLE [ 0.000000] BRK [0x710be000, 0x710befff] PGTABLE [ 0.000000] BRK [0x710bf000, 0x710bffff] PGTABLE [ 0.000000] BRK [0x710c0000, 0x710c0fff] PGTABLE [ 0.000000] BRK [0x710c1000, 0x710c1fff] PGTABLE [ 0.000000] BRK [0x710c2000, 0x710c2fff] PGTABLE [ 0.000000] BRK [0x710c3000, 0x710c3fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x316a3000-0x34b48fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 0x00000000DAFFE170 000094 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: FACP 0x00000000DAFEE000 00010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 0x00000000DAFF1000 0092DA (v02 SECCSD IVB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000DAF7B000 000040 [ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTL 00000001) [ 0.000000] ACPI: SSDT 0x00000000DAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 0x00000000DAFF0000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 0x00000000DAFED000 000038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 0x00000000DAFEC000 000098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 0x00000000DAFEB000 00003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: FPDT 0x00000000DAFEA000 000054 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 0x00000000DAFE9000 0007D7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFE8000 000AD0 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000DAFE7000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 0x00000000DAF78000 000055 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFE5000 00022E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000031f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x31f5cd000-0x31f5f7fff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000031f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000c42a9fff] [ 0.000000] node 0: [mem 0x00000000c44ac000-0x00000000d33eefff] [ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000031f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000031f5fffff] [ 0.000000] On node 0 totalpages: 3089290 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13432 pages used for memmap [ 0.000000] DMA32 zone: 859630 pages, LIFO batch:31 [ 0.000000] Normal zone: 34776 pages used for memmap [ 0.000000] Normal zone: 2225664 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 105 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc42aa000-0xc44abfff] [ 0.000000] PM: Registered nosave memory: [mem 0xd33ef000-0xdaeeefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaeef000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 40 pages/cpu @ (ptrval) s126976 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s126976 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3040862 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-4.15.0-041500rc2-generic root=UUID=707d0f89-4b1d-4432-9d50-6058dc4c1ee9 ro rootflags=subvol=@ quiet splash vt.handoff=7 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12011108K/12357160K available (9456K kernel code, 2460K rwdata, 4184K rodata, 2328K init, 2424K bss, 346052K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 38889 entries in 152 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 1496.545 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.09 BogoMIPS (lpj=5986180) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] SELinux: Disabled at boot. [ 0.024000] AppArmor: AppArmor disabled by boot time parameter [ 0.024000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.029379] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029454] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.029506] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.029817] CPU: Physical Processor ID: 0 [ 0.029818] CPU: Processor Core ID: 0 [ 0.029826] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.029826] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.029832] mce: CPU supports 7 MCE banks [ 0.029843] CPU0: Thermal monitoring enabled (TM1) [ 0.029857] process: using mwait in idle threads [ 0.029861] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.029862] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.030022] Freeing SMP alternatives memory: 36K [ 0.032100] TSC deadline timer enabled [ 0.032103] smpboot: CPU0: Intel(R) Core(TM) i3-2377M CPU @ 1.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.032203] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.032237] ... version: 3 [ 0.032238] ... bit width: 48 [ 0.032238] ... generic registers: 4 [ 0.032240] ... value mask: 0000ffffffffffff [ 0.032241] ... max period: 00007fffffffffff [ 0.032241] ... fixed-purpose events: 3 [ 0.032242] ... event mask: 000000070000000f [ 0.032293] Hierarchical SRCU implementation. [ 0.033676] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.033698] smp: Bringing up secondary CPUs ... [ 0.033811] x86: Booting SMP configuration: [ 0.033813] .... node #0, CPUs: #1 #2 #3 [ 0.042376] smp: Brought up 1 node, 4 CPUs [ 0.042376] smpboot: Max logical packages: 2 [ 0.042376] smpboot: Total of 4 processors activated (11972.36 BogoMIPS) [ 0.044597] devtmpfs: initialized [ 0.044597] x86/mm: Memory block size: 128MB [ 0.045528] evm: security.selinux [ 0.045529] evm: security.SMACK64 [ 0.045530] evm: security.SMACK64EXEC [ 0.045531] evm: security.SMACK64TRANSMUTE [ 0.045532] evm: security.SMACK64MMAP [ 0.045532] evm: security.apparmor [ 0.045533] evm: security.ima [ 0.045534] evm: security.capability [ 0.045558] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes) [ 0.045558] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.045558] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.045558] pinctrl core: initialized pinctrl subsystem [ 0.045558] RTC time: 10:25:26, date: 12/05/17 [ 0.045558] NET: Registered protocol family 16 [ 0.045558] audit: initializing netlink subsys (disabled) [ 0.045558] audit: type=2000 audit(1512469526.044:1): state=initialized audit_enabled=0 res=1 [ 0.045558] cpuidle: using governor ladder [ 0.045558] cpuidle: using governor menu [ 0.045558] ACPI: bus type PCI registered [ 0.045558] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.045558] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.045558] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.045558] PCI: Using configuration type 1 for base access [ 0.045558] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.049547] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.049547] ACPI: Added _OSI(Module Device) [ 0.049547] ACPI: Added _OSI(Processor Device) [ 0.049547] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.049547] ACPI: Added _OSI(Processor Aggregator Device) [ 0.049547] ACPI: Executed 1 blocks of module-level executable AML code [ 0.058539] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.060454] ACPI: Dynamic OEM Table Load: [ 0.060467] ACPI: SSDT 0xFFFF98BE5086A800 000784 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.061258] ACPI: Dynamic OEM Table Load: [ 0.061267] ACPI: SSDT 0xFFFF98BE509E4400 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.061827] ACPI: Dynamic OEM Table Load: [ 0.061834] ACPI: SSDT 0xFFFF98BE509D2600 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.063594] ACPI: EC: EC started [ 0.063595] ACPI: EC: interrupt blocked [ 0.065756] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC [ 0.065759] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.065761] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions [ 0.065762] ACPI: Interpreter enabled [ 0.065803] ACPI: (supports S0 S1 S3 S4 S5) [ 0.065804] ACPI: Using IOAPIC for interrupt routing [ 0.065852] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.066344] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.080834] ACPI: Power Resource [FN00] (off) [ 0.081001] ACPI: Power Resource [FN01] (off) [ 0.081160] ACPI: Power Resource [FN02] (off) [ 0.081322] ACPI: Power Resource [FN03] (off) [ 0.081481] ACPI: Power Resource [FN04] (off) [ 0.082705] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.082713] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.083030] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.084033] PCI host bridge to bus 0000:00 [ 0.084037] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.084039] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.084041] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.084043] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.084045] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.084056] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.084215] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.084231] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.084238] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.084244] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.084431] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.084465] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit] [ 0.084562] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.084700] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.084733] pci 0000:00:16.0: reg 0x10: [mem 0xf0615000-0xf061500f 64bit] [ 0.084828] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.084973] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.085002] pci 0000:00:1a.0: reg 0x10: [mem 0xf061a000-0xf061a3ff] [ 0.085108] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.085245] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.085278] pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit] [ 0.085388] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.085528] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.085640] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.085785] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.085896] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.086045] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.086075] pci 0000:00:1d.0: reg 0x10: [mem 0xf0619000-0xf06193ff] [ 0.086183] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.086317] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100 [ 0.086585] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.086614] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.086628] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.086638] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.086649] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.086662] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.086676] pci 0000:00:1f.2: reg 0x24: [mem 0xf0618000-0xf06187ff] [ 0.086735] pci 0000:00:1f.2: PME# supported from D3hot [ 0.086859] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.086887] pci 0000:00:1f.3: reg 0x10: [mem 0xf0614000-0xf06140ff 64bit] [ 0.086915] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.087180] pci 0000:01:00.0: [8086:088e] type 00 class 0x028000 [ 0.087258] pci 0000:01:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit] [ 0.087525] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.096053] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.096074] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff] [ 0.096237] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.096370] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.096496] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.096574] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.097002] pci 0000:02:00.0: supports D1 D2 [ 0.097004] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.108093] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.108099] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.108108] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.109522] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.109652] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.109779] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.109904] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.110028] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.110153] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.110278] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.110402] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.111416] ACPI: EC: interrupt unblocked [ 0.111427] ACPI: EC: event unblocked [ 0.111435] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.111437] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events [ 0.111536] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.111536] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.111536] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.111536] vgaarb: loaded [ 0.111536] SCSI subsystem initialized [ 0.111536] libata version 3.00 loaded. [ 0.111536] ACPI: bus type USB registered [ 0.111536] usbcore: registered new interface driver usbfs [ 0.111536] usbcore: registered new interface driver hub [ 0.111536] usbcore: registered new device driver usb [ 0.112022] EDAC MC: Ver: 3.0.0 [ 0.112119] PCI: Using ACPI for IRQ routing [ 0.113979] PCI: pci_cache_line_size set to 64 bytes [ 0.114045] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.114047] e820: reserve RAM buffer [mem 0xc42aa000-0xc7ffffff] [ 0.114048] e820: reserve RAM buffer [mem 0xd33ef000-0xd3ffffff] [ 0.114049] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.114050] e820: reserve RAM buffer [mem 0x31f600000-0x31fffffff] [ 0.114180] NetLabel: Initializing [ 0.114182] NetLabel: domain hash size = 128 [ 0.114182] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.114208] NetLabel: unlabeled traffic allowed by default [ 0.114233] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.114233] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.116024] clocksource: Switched to clocksource hpet [ 0.131844] VFS: Disk quotas dquot_6.6.0 [ 0.131876] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.131970] pnp: PnP ACPI init [ 0.132478] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.132481] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.132483] system 00:00: [io 0x5000-0x5003] has been reserved [ 0.132485] system 00:00: [io 0xffff] has been reserved [ 0.132487] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.132490] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.132492] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.132494] system 00:00: [io 0x0a00-0x0a0f] has been reserved [ 0.132496] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.132498] system 00:00: [io 0x5000-0x500f] could not be reserved [ 0.132507] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.132544] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.132638] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.132644] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.132693] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.132771] pnp 00:04: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.133099] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.133101] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.133103] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.133106] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.133108] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.133110] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.133112] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.133115] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.133117] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.133119] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.133122] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved [ 0.133127] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.133867] pnp: PnP ACPI: found 6 devices [ 0.140839] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.140873] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.140882] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff] [ 0.140894] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.140897] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.140907] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.140917] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.140919] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.140921] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.140923] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window] [ 0.140925] pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.140927] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.140928] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.141095] NET: Registered protocol family 2 [ 0.141385] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.141734] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.141929] TCP: Hash tables configured (established 131072 bind 65536) [ 0.141995] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.142070] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.142190] NET: Registered protocol family 1 [ 0.142210] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.143068] PCI: CLS 64 bytes, default 64 [ 0.143131] Unpacking initramfs... [ 1.613992] Freeing initrd memory: 53912K [ 1.614012] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.614016] software IO TLB [mem 0xcf3ef000-0xd33ef000] (64MB) mapped at [00000000cb4cb9e1-0000000045f176fe] [ 1.614348] Scanning for low memory corruption every 60 seconds [ 1.615306] Initialise system trusted keyrings [ 1.615320] Key type blacklist registered [ 1.615356] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.617060] zbud: loaded [ 1.617593] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.617784] fuse init (API version 7.26) [ 1.619542] Key type asymmetric registered [ 1.619544] Asymmetric key parser 'x509' registered [ 1.619585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.619636] io scheduler noop registered [ 1.619638] io scheduler deadline registered [ 1.619697] io scheduler cfq registered (default) [ 1.620371] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 1.620372] vesafb: scrolling: redraw [ 1.620375] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.620390] vesafb: framebuffer at 0xe0000000, mapped to 0x0000000041b4a741, using 4160k, total 4160k [ 1.731304] Console: switching to colour frame buffer device 170x48 [ 1.841805] fb0: VESA VGA frame buffer device [ 1.841845] intel_idle: MWAIT substates: 0x21120 [ 1.841847] intel_idle: v0.4.1 model 0x2A [ 1.842061] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.842401] ACPI: AC Adapter [ADP1] (on-line) [ 1.842483] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.842493] ACPI: Lid Switch [LID0] [ 1.842537] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.842570] ACPI: Power Button [PWRB] [ 1.842618] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.842647] ACPI: Power Button [PWRF] [ 1.844296] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.844731] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.844732] ACPI: Thermal Zone [TZ00] (34 C) [ 1.845272] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.845274] ACPI: Thermal Zone [TZ01] (30 C) [ 1.845434] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.845697] ACPI: Battery Slot [BAT1] (battery absent) [ 1.847704] Linux agpgart interface v0.103 [ 1.849843] loop: module loaded [ 1.850176] libphy: Fixed MDIO Bus: probed [ 1.850177] tun: Universal TUN/TAP device driver, 1.6 [ 1.850225] PPP generic driver version 2.4.2 [ 1.850280] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.850284] ehci-pci: EHCI PCI platform driver [ 1.850481] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.850489] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.850506] ehci-pci 0000:00:1a.0: debug port 2 [ 1.854407] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.854426] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf061a000 [ 1.868027] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.868088] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.868090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.868092] usb usb1: Product: EHCI Host Controller [ 1.868094] usb usb1: Manufacturer: Linux 4.15.0-041500rc2-generic ehci_hcd [ 1.868096] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.868361] hub 1-0:1.0: USB hub found [ 1.868371] hub 1-0:1.0: 3 ports detected [ 1.868697] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.868704] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.868720] ehci-pci 0000:00:1d.0: debug port 2 [ 1.872627] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.872646] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0619000 [ 1.888029] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.888086] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.888088] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.888090] usb usb2: Product: EHCI Host Controller [ 1.888092] usb usb2: Manufacturer: Linux 4.15.0-041500rc2-generic ehci_hcd [ 1.888093] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.888274] hub 2-0:1.0: USB hub found [ 1.888281] hub 2-0:1.0: 3 ports detected [ 1.888426] ehci-platform: EHCI generic platform driver [ 1.888441] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.888445] ohci-pci: OHCI PCI platform driver [ 1.888457] ohci-platform: OHCI generic platform driver [ 1.888465] uhci_hcd: USB Universal Host Controller Interface driver [ 1.888649] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.888655] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.889755] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 1.889762] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.889934] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.889936] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.889938] usb usb3: Product: xHCI Host Controller [ 1.889940] usb usb3: Manufacturer: Linux 4.15.0-041500rc2-generic xhci-hcd [ 1.889942] usb usb3: SerialNumber: 0000:00:14.0 [ 1.890176] hub 3-0:1.0: USB hub found [ 1.890191] hub 3-0:1.0: 4 ports detected [ 1.890823] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.890828] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.890873] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.890875] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.890877] usb usb4: Product: xHCI Host Controller [ 1.890878] usb usb4: Manufacturer: Linux 4.15.0-041500rc2-generic xhci-hcd [ 1.890880] usb usb4: SerialNumber: 0000:00:14.0 [ 1.891117] hub 4-0:1.0: USB hub found [ 1.891131] hub 4-0:1.0: 4 ports detected [ 1.891847] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 1.897762] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.897768] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.898083] mousedev: PS/2 mouse device common for all mice [ 1.898711] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.898743] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.898752] i2c /dev entries driver [ 1.898820] device-mapper: uevent: version 1.0.3 [ 1.898925] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@xxxxxxxxxx [ 1.898932] intel_pstate: Intel P-state driver initializing [ 1.899179] ledtrig-cpu: registered to indicate activity on CPUs [ 1.899677] NET: Registered protocol family 10 [ 1.905167] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.905412] Segment Routing with IPv6 [ 1.905448] NET: Registered protocol family 17 [ 1.905543] Key type dns_resolver registered [ 1.905966] RAS: Correctable Errors collector initialized. [ 1.906003] microcode: sig=0x206a7, pf=0x10, revision=0x29 [ 1.906083] microcode: Microcode Update Driver: v2.2. [ 1.906095] sched_clock: Marking stable (1906077076, 0)->(1886783884, 19293192) [ 1.906366] registered taskstats version 1 [ 1.906378] Loading compiled-in X.509 certificates [ 1.910294] Loaded X.509 cert 'Build time autogenerated kernel key: 2d4cc29bf3f92e367ff55c7ae0da425c23121610' [ 1.910336] zswap: loaded using pool lzo/zbud [ 1.915935] Key type big_key registered [ 1.915940] Key type trusted registered [ 1.918237] Key type encrypted registered [ 1.918242] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.918275] evm: HMAC attrs: 0x1 [ 1.918579] Magic number: 13:844:425 [ 1.918725] rtc_cmos 00:01: setting system clock to 2017-12-05 10:25:28 UTC (1512469528) [ 1.918812] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.918813] EDD information not available. [ 1.924422] Freeing unused kernel memory: 2328K [ 1.924424] Write protecting the kernel read-only data: 16384k [ 1.925005] Freeing unused kernel memory: 756K [ 1.932185] Freeing unused kernel memory: 1960K [ 1.943734] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.106818] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.106832] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.107657] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0x00000000d0080eee, e8:03:9a:0f:c4:4f, XID 0c900800 IRQ 25 [ 2.107661] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.111410] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 2.112518] ahci 0000:00:1f.2: version 3.0 [ 2.112832] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 2.112835] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 2.125157] scsi host0: ahci [ 2.125349] scsi host1: ahci [ 2.125527] scsi host2: ahci [ 2.125700] scsi host3: ahci [ 2.125870] scsi host4: ahci [ 2.126032] scsi host5: ahci [ 2.126118] ata1: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618100 irq 26 [ 2.126122] ata2: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618180 irq 26 [ 2.126123] ata3: DUMMY [ 2.126125] ata4: DUMMY [ 2.126126] ata5: DUMMY [ 2.126128] ata6: DUMMY [ 2.196757] [drm] Memory usable by graphics device = 2048M [ 2.196761] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 2.196763] fb: switching to inteldrmfb from VESA VGA [ 2.196800] Console: switching to colour dummy device 80x25 [ 2.196928] [drm] Replacing VGA console driver [ 2.202213] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.202215] [drm] Driver supports precise vblank timestamp query. [ 2.204853] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.208093] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.215771] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 2.217371] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.217868] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 2.228069] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.228117] usb 3-1: new low-speed USB device number 2 using xhci_hcd [ 2.250749] fbcon: inteldrmfb (fb0) is primary device [ 2.364808] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.364813] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.365201] hub 1-1:1.0: USB hub found [ 2.365401] hub 1-1:1.0: 6 ports detected [ 2.380151] usb 3-1: New USB device found, idVendor=046d, idProduct=c077 [ 2.380154] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.380156] usb 3-1: Product: USB Optical Mouse [ 2.380157] usb 3-1: Manufacturer: Logitech [ 2.384401] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.384403] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.384652] hub 2-1:1.0: USB hub found [ 2.384737] hub 2-1:1.0: 6 ports detected [ 2.387067] hidraw: raw HID events driver (C) Jiri Kosina [ 2.392110] usbcore: registered new interface driver usbhid [ 2.392111] usbhid: USB HID core driver [ 2.395148] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C077.0001/input/input7 [ 2.395336] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0 [ 2.439379] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.439415] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.439899] ata2.00: ATA-9: SanDisk SSD i100 24GB, 11.50.04, max UDMA/133 [ 2.439903] ata2.00: 46905264 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 2.440232] ata2.00: configured for UDMA/133 [ 2.440270] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 2.440273] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.441211] ata1.00: configured for UDMA/133 [ 2.441551] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 A6C0 PQ: 0 ANSI: 5 [ 2.441940] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.441994] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.441997] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.442009] sd 0:0:0:0: [sda] Write Protect is off [ 2.442012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.442039] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.442314] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 0.04 PQ: 0 ANSI: 5 [ 2.442602] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.442675] sd 1:0:0:0: [sdb] 46905264 512-byte logical blocks: (24.0 GB/22.4 GiB) [ 2.442697] sd 1:0:0:0: [sdb] Write Protect is off [ 2.442700] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.442742] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.443599] sdb: sdb1 [ 2.444128] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.620119] tsc: Refined TSC clocksource calibration: 1496.600 MHz [ 2.620130] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159296d3708, max_idle_ns: 440795218047 ns [ 2.656131] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 2.672100] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.784895] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da [ 2.784898] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.884329] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1035 [ 2.884332] usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.884334] usb 1-1.4: Product: WebCam SC-13HDL12131N [ 2.884336] usb 1-1.4: Manufacturer: Generic [ 2.884337] usb 1-1.4: SerialNumber: 200901010001 [ 2.938644] Console: switching to colour frame buffer device 170x48 [ 2.959270] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.991642] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 3.006404] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 3.022080] psmouse serio1: elantech: Elan sample query result 03, 3f, 86 [ 3.103834] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 3.244218] sda: sda2 sda4 < sda5 sda6 > [ 3.245191] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.644466] clocksource: Switched to clocksource tsc [ 4.068044] raid6: sse2x1 gen() 4600 MB/s [ 4.136038] raid6: sse2x1 xor() 3203 MB/s [ 4.204044] raid6: sse2x2 gen() 5360 MB/s [ 4.272038] raid6: sse2x2 xor() 3634 MB/s [ 4.340039] raid6: sse2x4 gen() 6372 MB/s [ 4.408041] raid6: sse2x4 xor() 4256 MB/s [ 4.408043] raid6: using algorithm sse2x4 gen() 6372 MB/s [ 4.408044] raid6: .... xor() 4256 MB/s, rmw enabled [ 4.408045] raid6: using ssse3x2 recovery algorithm [ 4.415372] xor: automatically using best checksumming function avx [ 4.464894] Btrfs loaded, crc32c=crc32c-intel [ 4.867233] BTRFS: device fsid 707d0f89-4b1d-4432-9d50-6058dc4c1ee9 devid 1 transid 45111 /dev/sdb1 [ 4.900754] BTRFS info (device sdb1): disk space caching is enabled [ 4.900757] BTRFS info (device sdb1): has skinny extents [ 4.916968] BTRFS info (device sdb1): enabling ssd optimizations [ 5.152161] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.160343] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 5.180235] systemd[1]: Detected architecture x86-64. [ 5.180899] systemd[1]: Set hostname to <caravena-530U3C-530U4C>. [ 5.298859] systemd[1]: Reached target User and Group Name Lookups. [ 5.299188] systemd[1]: Created slice User and Session Slice. [ 5.299209] systemd[1]: Reached target Remote File Systems. [ 5.299268] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.299462] systemd[1]: Created slice System Slice. [ 5.300304] systemd[1]: Mounting POSIX Message Queue File System... [ 5.300419] systemd[1]: Listening on udev Control Socket. [ 5.345690] BTRFS info (device sdb1): disk space caching is enabled [ 5.370815] swapon: swapfile has holes [ 5.375090] lp: driver loaded but no devices found [ 5.388107] ppdev: user-space parallel port driver [ 5.448830] systemd-journald[293]: Received request to flush runtime journal from PID 1 [ 5.714555] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.777062] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247) [ 5.777076] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.777082] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 5.777090] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.777092] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 5.777100] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.777102] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 5.777109] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.777111] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.831263] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.843787] Bluetooth: Core ver 2.22 [ 5.843952] NET: Registered protocol family 31 [ 5.843954] Bluetooth: HCI device and connection manager initialized [ 5.843960] Bluetooth: HCI socket layer initialized [ 5.843964] Bluetooth: L2CAP socket layer initialized [ 5.843975] Bluetooth: SCO socket layer initialized [ 5.849349] media: Linux media interface: v0.10 [ 5.870057] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.873649] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 5.873653] cfg80211: failed to load regulatory.db [ 5.899678] usbcore: registered new interface driver btusb [ 5.900977] Linux video capture interface: v2.00 [ 5.920143] Intel(R) Wireless WiFi driver for Linux [ 5.920145] Copyright(c) 2003- 2015 Intel Corporation [ 5.925660] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 5.926534] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 5.926536] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 5.926537] RAPL PMU: hw unit of domain package 2^-16 Joules [ 5.926539] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 5.933761] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 5.993390] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL12131N (2232:1035) [ 6.023247] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 6.023251] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 6.023254] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 6.023258] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [ 6.061690] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized! [ 6.061695] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized! [ 6.061699] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized! [ 6.062102] input: WebCam SC-13HDL12131N: WebCam S as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8 [ 6.062264] usbcore: registered new interface driver uvcvideo [ 6.062266] USB Video Class driver (1.1.1) [ 6.082014] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 6.148789] samsung_laptop: detected SABI interface: SwSmi@ [ 6.234069] intel_rapl: Found RAPL domain package [ 6.234073] intel_rapl: Found RAPL domain core [ 6.234074] intel_rapl: Found RAPL domain uncore [ 6.234082] intel_rapl: RAPL package 0 domain package locked by BIOS [ 6.243485] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.285950] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.285956] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.285960] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 6.285963] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.285965] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.285970] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 6.285973] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 6.294956] swapon: swapfile has holes [ 6.317572] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 6.317686] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 6.317799] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 6.323174] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 6.338531] random: crng init done [ 7.967444] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 8.411674] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.411678] Bluetooth: BNEP filters: protocol multicast [ 8.411684] Bluetooth: BNEP socket layer initialized [ 8.855667] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 8.966211] r8169 0000:02:00.0 enp2s0: link down [ 8.967846] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 8.977820] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 8.990680] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 9.292841] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 9.381313] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 9.515306] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 15.551364] wlp1s0: authenticate with 4c:fa:ca:42:1f:d4 [ 15.555557] wlp1s0: send auth to 4c:fa:ca:42:1f:d4 (try 1/3) [ 15.623450] wlp1s0: authenticated [ 15.623967] wlp1s0: waiting for beacon from 4c:fa:ca:42:1f:d4 [ 15.728179] wlp1s0: associate with 4c:fa:ca:42:1f:d4 (try 1/3) [ 15.738196] wlp1s0: RX AssocResp from 4c:fa:ca:42:1f:d4 (capab=0x1411 status=0 aid=2) [ 15.757569] wlp1s0: associated [ 15.827382] wlp1s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 4c:fa:ca:42:1f:d4 [ 17.255493] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 4567.561946] Bluetooth: RFCOMM TTY layer initialized [ 4567.561956] Bluetooth: RFCOMM socket layer initialized [ 4567.561964] Bluetooth: RFCOMM ver 1.11 [ 4571.687313] rfkill: input handler disabled [11355.762474] perf: interrupt took too long (2552 > 2500), lowering kernel.perf_event_max_sample_rate to 78250 [11784.166867] wlp1s0: authenticate with 4c:fa:ca:42:23:34 [11784.169566] wlp1s0: send auth to 4c:fa:ca:42:23:34 (try 1/3) [11784.234477] wlp1s0: 4c:fa:ca:42:23:34 denied authentication (status 17) [11784.575716] wlp1s0: authenticate with 4c:fa:ca:42:1f:c4 [11784.578176] wlp1s0: send auth to 4c:fa:ca:42:1f:c4 (try 1/3) [11784.581621] wlp1s0: 4c:fa:ca:42:1f:c4 denied authentication (status 17) [11784.987794] wlp1s0: authenticate with 4c:fa:ca:42:23:24 [11784.990325] wlp1s0: send auth to 4c:fa:ca:42:23:24 (try 1/3) [11784.993669] wlp1s0: authenticated [11784.997987] wlp1s0: associate with 4c:fa:ca:42:23:24 (try 1/3) [11785.013902] wlp1s0: RX AssocResp from 4c:fa:ca:42:23:24 (capab=0x1431 status=0 aid=11) [11785.033572] wlp1s0: associated [11785.038866] wlp1s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 4c:fa:ca:42:23:24 [11971.922266] wlp1s0: disconnect from AP 4c:fa:ca:42:23:24 for new auth to 4c:fa:ca:42:24:84 [11971.942156] wlp1s0: authenticate with 4c:fa:ca:42:24:84 [11971.945085] wlp1s0: send auth to 4c:fa:ca:42:24:84 (try 1/3) [11971.947482] wlp1s0: 4c:fa:ca:42:24:84 denied authentication (status 17) [11972.266473] wlp1s0: authenticate with 4c:fa:ca:42:23:24 [11972.268796] wlp1s0: send auth to 4c:fa:ca:42:23:24 (try 1/3) [11972.271306] wlp1s0: authenticated [11972.273577] wlp1s0: associate with 4c:fa:ca:42:23:24 (try 1/3) [11972.288456] wlp1s0: RX ReassocResp from 4c:fa:ca:42:23:24 (capab=0x1431 status=0 aid=11) [11972.315223] wlp1s0: associated [11972.394398] wlp1s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 4c:fa:ca:42:23:24 [12476.553874] perf: interrupt took too long (3257 > 3190), lowering kernel.perf_event_max_sample_rate to 61250 [13596.189452] perf: interrupt took too long (4072 > 4071), lowering kernel.perf_event_max_sample_rate to 49000 [15573.849782] perf: interrupt took too long (5121 > 5090), lowering kernel.perf_event_max_sample_rate to 39000 [16011.980437] SGI XFS with ACLs, security attributes, realtime, no debug enabled [16012.000963] JFS: nTxBlock = 8192, nTxLock = 65536 [16012.026242] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [16012.066568] QNX4 filesystem 0.2.3 registered. [16292.761868] wlp1s0: disconnect from AP 4c:fa:ca:42:23:24 for new auth to 4c:fa:ca:42:23:64 [16292.781608] wlp1s0: authenticate with 4c:fa:ca:42:23:64 [16292.785383] wlp1s0: send auth to 4c:fa:ca:42:23:64 (try 1/3) [16292.814676] wlp1s0: authenticated [16292.816857] wlp1s0: associate with 4c:fa:ca:42:23:64 (try 1/3) [16292.841865] wlp1s0: RX ReassocResp from 4c:fa:ca:42:23:64 (capab=0x1431 status=8 aid=69) [16292.841870] wlp1s0: 4c:fa:ca:42:23:64 denied association (code=8) [16293.190171] wlp1s0: authenticate with 4c:fa:ca:42:24:94 [16293.192624] wlp1s0: send auth to 4c:fa:ca:42:24:94 (try 1/3) [16293.290559] wlp1s0: authenticated [16293.292734] wlp1s0: associate with 4c:fa:ca:42:24:94 (try 1/3) [16293.293816] wlp1s0: RX AssocResp from 4c:fa:ca:42:24:94 (capab=0x1411 status=8 aid=0) [16293.293819] wlp1s0: 4c:fa:ca:42:24:94 denied association (code=8) [16293.483893] wlp1s0: authenticate with 4c:fa:ca:57:14:e4 [16293.487367] wlp1s0: send auth to 4c:fa:ca:57:14:e4 (try 1/3) [16293.490105] wlp1s0: authenticated [16293.492848] wlp1s0: associate with 4c:fa:ca:57:14:e4 (try 1/3) [16293.513247] wlp1s0: RX AssocResp from 4c:fa:ca:57:14:e4 (capab=0x1431 status=0 aid=3) [16293.537140] wlp1s0: associated [16293.648764] wlp1s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 4c:fa:ca:57:14:e4 [16418.651235] wlp1s0: disconnect from AP 4c:fa:ca:57:14:e4 for new auth to 4c:fa:ca:42:23:24 [16418.695583] wlp1s0: authenticate with 4c:fa:ca:42:23:24 [16418.700685] wlp1s0: send auth to 4c:fa:ca:42:23:24 (try 1/3) [16418.708955] wlp1s0: authenticated [16418.709793] wlp1s0: associate with 4c:fa:ca:42:23:24 (try 1/3) [16418.782113] wlp1s0: RX ReassocResp from 4c:fa:ca:42:23:24 (capab=0x1431 status=0 aid=3) [16418.817026] wlp1s0: associated [16418.910274] wlp1s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 4c:fa:ca:42:23:24 [17359.729003] wlp1s0: deauthenticating from 4c:fa:ca:42:23:24 by local choice (Reason: 3=DEAUTH_LEAVING) [17361.733330] iwlwifi 0000:01:00.0: fail to flush all tx fifo queues Q 0 [17361.733401] iwlwifi 0000:01:00.0: Queue 0 is active on fifo 3 and stuck for 0 ms. SW [72, 73] HW [72, 73] FH TRB=0x080300048 [17361.785874] iwlwifi 0000:01:00.0: RF_KILL bit toggled to disable radio. [17361.785880] iwlwifi 0000:01:00.0: reporting RF_KILL (radio disabled) [17365.721874] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio. [17365.721880] iwlwifi 0000:01:00.0: reporting RF_KILL (radio enabled) [17365.734870] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [17366.038922] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [17366.123641] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [17366.187684] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [17372.134869] wlp1s0: authenticate with 4c:fa:ca:42:1f:d4 [17372.139814] wlp1s0: send auth to 4c:fa:ca:42:1f:d4 (try 1/3) [17372.177554] wlp1s0: authenticated [17372.180261] wlp1s0: associate with 4c:fa:ca:42:1f:d4 (try 1/3) [17372.191935] wlp1s0: RX AssocResp from 4c:fa:ca:42:1f:d4 (capab=0x1411 status=0 aid=10) [17372.211006] wlp1s0: associated [17372.279162] wlp1s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 4c:fa:ca:42:1f:d4 [17373.692067] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [20164.614647] wlp1s0: deauthenticating from 4c:fa:ca:42:1f:d4 by local choice (Reason: 3=DEAUTH_LEAVING) [20164.665033] iwlwifi 0000:01:00.0: RF_KILL bit toggled to disable radio. [20164.665037] iwlwifi 0000:01:00.0: reporting RF_KILL (radio disabled) [20168.544323] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio. [20168.544328] iwlwifi 0000:01:00.0: reporting RF_KILL (radio enabled) [20168.558257] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [20168.863994] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [20168.949740] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [20169.009320] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [20175.110720] wlp1s0: authenticate with 4c:fa:ca:42:1f:d4 [20175.111824] wlp1s0: send auth to 4c:fa:ca:42:1f:d4 (try 1/3) [20175.112631] wlp1s0: authenticated [20175.116390] wlp1s0: associate with 4c:fa:ca:42:1f:d4 (try 1/3) [20175.128351] wlp1s0: RX AssocResp from 4c:fa:ca:42:1f:d4 (capab=0x1411 status=0 aid=9) [20175.147134] wlp1s0: associated [20175.159308] wlp1s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 4c:fa:ca:42:1f:d4 [20176.632326] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [21452.930172] perf: interrupt took too long (6520 > 6401), lowering kernel.perf_event_max_sample_rate to 30500
