did you notice that Marvell 88W8964 based clients will crash 10.4-3.5.3
firmwares? (tested with 9984 and 10.4-3.5.3-00038)
client device was a linksys wrt3200acm running dd-wrt for testing
Am 28.11.2017 um 11:07 schrieb bpothuno@xxxxxxxxxxxxxxxx:
From: Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxxxx>
Data packets are not sent by STA in case of STA joined to
non QOS AP (WMM disabled AP). This is happening because of STA
is sending data packets to firmware from host with qos enabled
along with non qos queue value(TID = 16).
Due to qos enabled, firmware is discarding the packet.
This patch fixes this issue by updating the qos based on station
WME capability field if WMM is disabled in AP.
This patch is required by 10.4 family chipsets like
QCA4019/QCA9888/QCA9884/QCA99X0.
Firmware Versoin : 10.4-3.5.1-00018.
For 10.2.4 family chipsets QCA988X/QCA9887 and QCA6174 this patch
has no effect.
Signed-off-by: Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0a947ee..2616b99 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2563,7 +2563,7 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
}
break;
case WMI_VDEV_TYPE_STA:
- if (vif->bss_conf.qos)
+ if (sta->wme)
arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
break;
case WMI_VDEV_TYPE_IBSS:
--
Mit freundlichen Grüssen / Regards
Sebastian Gottschall / CTO
NewMedia-NET GmbH - DD-WRT
Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: s.gottschall@xxxxxxxxxx
Tel.: +496251-582650 / Fax: +496251-5826565
