For correct interpretation of a tx rate, the corresponding rate flags are
needed (e.g. whether a HT-MCS rate or a legacy rate) and moreover for more
correct simulation the other infos of the flags are important (like
short-GI). Keeping compatibility, the flags are not integrated into the
existing hwsim_tx_rate, but transmitted as an additional netlink attribute.
Signed-off-by: Benjamin Beichler <benjamin.beichler@xxxxxxxxxxxxxx>
---
drivers/net/wireless/mac80211_hwsim.c | 41 +++++++++++++++++++++-
drivers/net/wireless/mac80211_hwsim.h | 65 ++++++++++++++++++++++++++++++++++-
2 files changed, 104 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 3d2b16822269..3689f863da8d 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1022,6 +1022,36 @@ static int hwsim_unicast_netgroup(struct mac80211_hwsim_data *data,
return res;
}
+static inline u16 trans_tx_rate_flags_ieee2hwsim(struct ieee80211_tx_rate *rate)
+{
+ u16 result = 0;
+
+ if (rate->flags & IEEE80211_TX_RC_USE_RTS_CTS)
+ result |= MAC80211_HWSIM_TX_RC_USE_RTS_CTS;
+ if (rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
+ result |= MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT;
+ if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+ result |= MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE;
+ if (rate->flags & IEEE80211_TX_RC_MCS)
+ result |= MAC80211_HWSIM_TX_RC_MCS;
+ if (rate->flags & IEEE80211_TX_RC_GREEN_FIELD)
+ result |= MAC80211_HWSIM_TX_RC_GREEN_FIELD;
+ if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+ result |= MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH;
+ if (rate->flags & IEEE80211_TX_RC_DUP_DATA)
+ result |= MAC80211_HWSIM_TX_RC_DUP_DATA;
+ if (rate->flags & IEEE80211_TX_RC_SHORT_GI)
+ result |= MAC80211_HWSIM_TX_RC_SHORT_GI;
+ if (rate->flags & IEEE80211_TX_RC_VHT_MCS)
+ result |= MAC80211_HWSIM_TX_RC_VHT_MCS;
+ if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
+ result |= MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH;
+ if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
+ result |= MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH;
+
+ return result;
+}
+
static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
struct sk_buff *my_skb,
int dst_portid)
@@ -1034,6 +1064,7 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
unsigned int hwsim_flags = 0;
int i;
struct hwsim_tx_rate tx_attempts[IEEE80211_TX_MAX_RATES];
+ struct hwsim_tx_rate_flag tx_attempts_flags[IEEE80211_TX_MAX_RATES];
uintptr_t cookie;
if (data->ps != PS_DISABLED)
@@ -1085,7 +1116,11 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
tx_attempts[i].idx = info->status.rates[i].idx;
+ tx_attempts_flags[i].idx = info->status.rates[i].idx;
tx_attempts[i].count = info->status.rates[i].count;
+ tx_attempts_flags[i].flags =
+ trans_tx_rate_flags_ieee2hwsim(
+ &info->status.rates[i]);
}
if (nla_put(skb, HWSIM_ATTR_TX_INFO,
@@ -1093,6 +1128,11 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
tx_attempts))
goto nla_put_failure;
+ if (nla_put(skb, HWSIM_ATTR_TX_INFO_FLAGS,
+ sizeof(struct hwsim_tx_rate_flag) * IEEE80211_TX_MAX_RATES,
+ tx_attempts_flags))
+ goto nla_put_failure;
+
/* We create a cookie to identify this skb */
data->pending_cookie++;
cookie = data->pending_cookie;
@@ -2999,7 +3039,6 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2,
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
txi->status.rates[i].idx = tx_attempts[i].idx;
txi->status.rates[i].count = tx_attempts[i].count;
- /*txi->status.rates[i].flags = 0;*/
}
txi->status.ack_signal = nla_get_u32(info->attrs[HWSIM_ATTR_SIGNAL]);
diff --git a/drivers/net/wireless/mac80211_hwsim.h b/drivers/net/wireless/mac80211_hwsim.h
index 7b2f1e9e66a8..7ef9aa18fb82 100644
--- a/drivers/net/wireless/mac80211_hwsim.h
+++ b/drivers/net/wireless/mac80211_hwsim.h
@@ -64,7 +64,8 @@ enum hwsim_tx_control_flags {
* @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to
* kernel, uses:
* %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FLAGS,
- * %HWSIM_ATTR_TX_INFO, %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE
+ * %HWSIM_ATTR_TX_INFO, %WSIM_ATTR_TX_INFO_FLAGS,
+ * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE
* @HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters,
* returns the radio ID (>= 0) or negative on errors, if successful
* then multicast the result, uses optional parameter:
@@ -181,4 +182,66 @@ struct hwsim_tx_rate {
u8 count;
} __packed;
+/**
+ * enum hwsim_tx_rate_flags - per-rate flags set by the rate control algorithm.
+ * Inspired by structure mac80211_rate_control_flags. New flags may be
+ * appended, but old flags not deleted, to keep compatibility for
+ * userspace.
+ *
+ * These flags are set by the Rate control algorithm for each rate during tx,
+ * in the @flags member of struct ieee80211_tx_rate.
+ *
+ * @MAC80211_HWSIM_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
+ * @MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
+ * This is set if the current BSS requires ERP protection.
+ * @MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
+ * @MAC80211_HWSIM_TX_RC_MCS: HT rate.
+ * @MAC80211_HWSIM_TX_RC_VHT_MCS: VHT MCS rate, in this case the idx field is
+ * split into a higher 4 bits (Nss) and lower 4 bits (MCS number)
+ * @MAC80211_HWSIM_TX_RC_GREEN_FIELD: Indicates whether this rate should be used
+ * in Greenfield mode.
+ * @MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be
+ * 40 MHz.
+ * @MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH: Indicates 80 MHz transmission
+ * @MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH: Indicates 160 MHz transmission
+ * (80+80 isn't supported yet)
+ * @MAC80211_HWSIM_TX_RC_DUP_DATA: The frame should be transmitted on both of
+ * the adjacent 20 MHz channels, if the current channel type is
+ * NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
+ * @MAC80211_HWSIM_TX_RC_SHORT_GI: Short Guard interval should be used for this
+ * rate.
+ */
+enum hwsim_tx_rate_flags {
+ MAC80211_HWSIM_TX_RC_USE_RTS_CTS = BIT(0),
+ MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT = BIT(1),
+ MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE = BIT(2),
+
+ /* rate index is an HT/VHT MCS instead of an index */
+ MAC80211_HWSIM_TX_RC_MCS = BIT(3),
+ MAC80211_HWSIM_TX_RC_GREEN_FIELD = BIT(4),
+ MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH = BIT(5),
+ MAC80211_HWSIM_TX_RC_DUP_DATA = BIT(6),
+ MAC80211_HWSIM_TX_RC_SHORT_GI = BIT(7),
+ MAC80211_HWSIM_TX_RC_VHT_MCS = BIT(8),
+ MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH = BIT(9),
+ MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH = BIT(10),
+};
+
+/**
+ * struct hwsim_tx_rate - rate selection/status
+ *
+ * @idx: rate index to attempt to send with
+ * @count: number of tries in this rate before going to the next rate
+ *
+ * A value of -1 for @idx indicates an invalid rate and, if used
+ * in an array of retry rates, that no more rates should be tried.
+ *
+ * When used for transmit status reporting, the driver should
+ * always report the rate and number of retries used.
+ *
+ */
+struct hwsim_tx_rate_flag {
+ s8 idx;
+ u16 flags;
+} __packed;
#endif /* __MAC80211_HWSIM_H */
--
2.15.0
