Add documentation describing how device tree can be used to configure
wireless chips supported by the mt76 driver.
Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
---
.../bindings/net/wireless/mediatek,mt76.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
new file mode 100644
index 000000000000..0c17a0ec9b7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
@@ -0,0 +1,32 @@
+* MediaTek mt76xx devices
+
+This node provides properties for configuring the MediaTek mt76xx wireless
+device. The node is expected to be specified as a child node of the PCI
+controller to which the wireless chip is connected.
+
+Optional properties:
+
+- mac-address: See ethernet.txt in the parent directory
+- local-mac-address: See ethernet.txt in the parent directory
+- ieee80211-freq-limit: See ieee80211.txt
+- mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data
+
+Optional nodes:
+- led: Properties for a connected LED
+ Optional properties:
+ - led-sources: See Documentation/devicetree/bindings/leds/common.txt
+
+&pcie {
+ pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+
+ led {
+ led-sources = <2>;
+ };
+ };
+ };
+};
--
2.14.2
