Hello all, I know there been a lot of work done on Realtek drivers in the last few months, and was wondering whether this will be of use for my particular issue. We have a Raspberry Pi that needs to use a USB wireless adaptor (2001:3314) which uses the rtl8812AU chipset. We have to use this device as it's the only one that has been qualified for this particular use case. We have been using an out of tree driver, I think originally from Realtek, that works, but after a few days locks up, and often requires a reboot on the Pi. We do have some mitigation strategies, but it' would be better to have a working driver. The Pi is, on the whole, inaccessible. The OoT driver is from here https://github.com/diederikdehaas/rtl8812AU and appear quite ancient. So, I've been looking at the 4.14 staging drivers that do seem to have support for some realtek devices. However, none of the drivers I have built recognise the module. The source of rtlwifi does refer to the 8812AU, but only to ignore it. There are other references throughout the source., My question, eventually, is down to figuring out whether any of the new staging code is destined to work on this device, or am I going to have to stick with the driver we are currently using which clearly has a lockup issue that I, in all likelihood, not going to be able to track down since its takes days for it to occur. Or if anyone has any suggestions for getting this working, I'm all ears. TIA James Hughes, Raspberry Pi.
