From: Siva Rebbagondla <siva.rebbagondla@xxxxxxxxxxxxxxxxxx> USB endpoint 1 is used for WLAN which is presently in use. USB endpoint 2 is introduced for BT Rx traffic. Enumeration of Rx BT endpoint and submitting Rx BT URB are added. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@xxxxxxxxx> Signed-off-by: Siva Rebbagondla <siva.rebbagondla@xxxxxxxxxxxxxxxxxx> Signed-off-by: Amitkumar Karwar <amit.karwar@xxxxxxxxxxxxxxxxxx> --- drivers/net/wireless/rsi/rsi_91x_usb.c | 37 ++++++++++++++++++++-------------- drivers/net/wireless/rsi/rsi_usb.h | 6 +++--- 2 files changed, 25 insertions(+), 18 deletions(-) diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c index 147fcee2..b212a15 100644 --- a/drivers/net/wireless/rsi/rsi_91x_usb.c +++ b/drivers/net/wireless/rsi/rsi_91x_usb.c @@ -103,41 +103,42 @@ static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface, struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; __le16 buffer_size; - int ii, bep_found = 0; + int ii, bin_found = 0, bout_found = 0; iface_desc = &(interface->altsetting[0]); for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) { endpoint = &(iface_desc->endpoint[ii].desc); - if ((!(dev->bulkin_endpoint_addr)) && + if (!dev->bulkin_endpoint_addr[bin_found] && (endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & - USB_ENDPOINT_XFERTYPE_MASK) == + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) { buffer_size = endpoint->wMaxPacketSize; - dev->bulkin_size = buffer_size; - dev->bulkin_endpoint_addr = + dev->bulkin_size[bin_found] = buffer_size; + dev->bulkin_endpoint_addr[bin_found] = endpoint->bEndpointAddress; + bin_found++; } - if (!dev->bulkout_endpoint_addr[bep_found] && + if (!dev->bulkout_endpoint_addr[bout_found] && !(endpoint->bEndpointAddress & USB_DIR_IN) && ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK)) { - dev->bulkout_endpoint_addr[bep_found] = + USB_ENDPOINT_XFER_BULK)) { + buffer_size = endpoint->wMaxPacketSize; + dev->bulkout_endpoint_addr[bout_found] = endpoint->bEndpointAddress; buffer_size = endpoint->wMaxPacketSize; - dev->bulkout_size[bep_found] = buffer_size; - bep_found++; + dev->bulkout_size[bout_found] = buffer_size; + bout_found++; } - if (bep_found >= MAX_BULK_EP) + if (bin_found >= MAX_BULK_EP || bout_found >= MAX_BULK_EP) break; } - if (!(dev->bulkin_endpoint_addr) && - (dev->bulkout_endpoint_addr[0])) + if (!(dev->bulkin_endpoint_addr[0]) && + dev->bulkout_endpoint_addr[0]) return -EINVAL; return 0; @@ -273,7 +274,7 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num) usb_fill_bulk_urb(urb, dev->usbdev, usb_rcvbulkpipe(dev->usbdev, - dev->bulkin_endpoint_addr), + dev->bulkin_endpoint_addr[ep_num - 1]), urb->transfer_buffer, 3000, rsi_rx_done_handler, @@ -745,6 +746,12 @@ static int rsi_probe(struct usb_interface *pfunction, if (status) goto err1; + if (adapter->priv->coex_mode > 1) { + status = rsi_rx_urb_submit(adapter, BT_EP); + if (status) + goto err1; + } + return 0; err1: rsi_deinit_usb_interface(adapter); diff --git a/drivers/net/wireless/rsi/rsi_usb.h b/drivers/net/wireless/rsi/rsi_usb.h index 7e781d5..0fda14c 100644 --- a/drivers/net/wireless/rsi/rsi_usb.h +++ b/drivers/net/wireless/rsi/rsi_usb.h @@ -31,7 +31,7 @@ #define USB_VENDOR_REGISTER_WRITE 0x16 #define RSI_USB_TX_HEAD_ROOM 128 -#define MAX_RX_URBS 1 +#define MAX_RX_URBS 2 #define MAX_BULK_EP 8 #define WLAN_EP 1 #define BT_EP 2 @@ -54,8 +54,8 @@ struct rsi_91x_usbdev { struct usb_interface *pfunction; struct rx_usb_ctrl_block rx_cb[MAX_RX_URBS]; u8 *tx_buffer; - __le16 bulkin_size; - u8 bulkin_endpoint_addr; + __le16 bulkin_size[MAX_BULK_EP]; + u8 bulkin_endpoint_addr[MAX_BULK_EP]; __le16 bulkout_size[MAX_BULK_EP]; u8 bulkout_endpoint_addr[MAX_BULK_EP]; u32 tx_blk_size; -- 2.7.4