Igor Mitsyanko <igor.mitsyanko.os@xxxxxxxxxxxxx> wrote: > From: Igor Mitsyanko <igor.mitsyanko.os@xxxxxxxxxxxxx> > > HT/VHT capabilities must be reported per each band supported by a radio, > not for all bands on a radio. Furthermore, driver better not assume > any capabilities and just use whetever is reported by device itself. > > To support this, convert "get channels" command into "get band info" > command. Difference is that it may also carry HT/VHT capabilities along > with channels information. > > While at it, also add "num_bitrates" field to "get band info" command, > for future use. > > Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@xxxxxxxxxxxxx> 9 patches applied to wireless-drivers-next.git, thanks. e294cbfda056 qtnfmac: use per-band HT/VHT info from wireless device d42df85f7d85 qtnfmac: initialize HT/VHT caps "can override" masks d1398b5b34cc qtnfmac: get rid of PHYMODE capabilities flags 18b7470f92df qtnfmac: extend "IE set" TLV to include frame type info 5face518d446 qtnfmac: SCAN results: retreive frame type information from "IE set" TLV 4d1f0fabdc45 qtnfmac: convert "Append IEs" command to QTN_TLV_ID_IE_SET usage 17011da0b8f0 qtnfmac: configure and start AP interface with a single command a3945f43761c qtnfmac: include HTCAP and VHTCAP into config AP command c9889671736c qtnfmac: pass all CONNECT cmd params to wireless card for processing -- https://patchwork.kernel.org/patch/10033509/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
