Commit 4ca1807815aa6801aaced7fdefa9edacc2521767 disables the use of the mac80211 TXQs for some devices because of a theoretical throughput regression. The original regression report[1] was related to fq_codel qdisc drop performance, which was fixed in 9d18562a227874289fda8ca5d117d8f503f1dcca. Since then, we have not seen the TXQ-related regression, so it should be safe to re-enable TXQs. [1] http://lists.infradead.org/pipermail/ath10k/2016-April/007266.html Signed-off-by: Toke Høiland-Jørgensen <toke@xxxxxxx> --- This has been in LEDE trunk for a couple of months now with good results. Changes since v1: - Update commit message to refer to original report and the fix for it. - Add ath10k list to cc drivers/net/wireless/ath/ath10k/mac.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 0a947eef348d..ca596ecd2d64 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -8329,15 +8329,6 @@ int ath10k_mac_register(struct ath10k *ar) ath10k_warn(ar, "failed to initialise DFS pattern detector\n"); } - /* Current wake_tx_queue implementation imposes a significant - * performance penalty in some setups. The tx scheduling code needs - * more work anyway so disable the wake_tx_queue unless firmware - * supports the pull-push mechanism. - */ - if (!test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL, - ar->running_fw->fw_file.fw_features)) - ar->ops->wake_tx_queue = NULL; - ret = ath10k_mac_init_rd(ar); if (ret) { ath10k_err(ar, "failed to derive regdom: %d\n", ret); -- 2.15.0
