Search Linux Wireless

Re: [PATCH] brcmfmac: add support for external 32khz clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

> Kalle Valo <kvalo@xxxxxxxxxxxxxx> hat am 7. November 2017 um 03:18 geschrieben:
> 
> 
> Stefan Wahren <stefan.wahren@xxxxxxxx> writes:
> 
> >> Simon Shields <simon@xxxxxxxxxxxxx> hat am 4. November 2017 um 14:24 geschrieben:
> >> 
> >> 
> >> Some boards use an external 32khz clock for low-power
> >> mode timing. Make sure the clock is powered on while the chipset
> >> is active.
> >> 
> >> Signed-off-by: Simon Shields <simon@xxxxxxxxxxxxx>
> >> ---
> >>  .../devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt     |  2 ++
> >>  drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h      |  2 ++
> >>  drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c          |  5 +++++
> >>  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c        | 10 ++++++++++
> >>  4 files changed, 19 insertions(+)
> >> 
> >> diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
> >> index b2bd4704f859..37add5e29272 100644
> >> --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
> >> +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
> >> @@ -17,6 +17,8 @@ Optional properties:
> >>  	When not specified the device will use in-band SDIO interrupts.
> >>   - interrupt-names : name of the out-of-band interrupt, which must be set
> >>  	to "host-wake".
> >> + - clocks : external 32khz clock
> >> + - clock-names : name of the external 32khz clock, must be "32khz"
> >
> > sorry for the nitpicking, but according to the datasheet [1] it's
> > 32768 Hz. Apart from that i suggest to use a functional name for the
> > clock like "low_power" or something else, which is more flexible and
> > future-proof.
> >
> > Btw this binding needs to be a separate patch, which should go to the
> > devicetree guys.
> 
> Previously I have applied binding documentation changes which the DT
> maintainers have acked, that's why I specifically asked to Cc device
> tree list. Has something changed?

as long as the changes has been acked this should be okay. I was referring to point 1 in this guideline [1].

[1] - https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/submitting-patches.txt?h=v4.14-rc8

> 
> -- 
> Kalle Valo



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux