From: Ron Rindjunsky <ron.rindjunsky@xxxxxxxxx>
This patch modifies the band selection management when scanning, so
bands are now scanned according to HW band support.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@xxxxxxxxx>
Signed-off-by: Tomas Winkler <tomas.winkler@xxxxxxxxx>
Signed-off-by: Zhu Yi <yi.zhu@xxxxxxxxx>
---
John, this patch is for 2.6.26. I'll submit a separate patch for
wireless-testing later.
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 13925b6..b1b3c52 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2227,7 +2227,10 @@ static int iwl3945_scan_initiate(struct iwl3945_priv *priv)
}
IWL_DEBUG_INFO("Starting scan...\n");
- priv->scan_bands = 2;
+ if (priv->cfg->sku & IWL_SKU_G)
+ priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+ if (priv->cfg->sku & IWL_SKU_A)
+ priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
set_bit(STATUS_SCANNING, &priv->status);
priv->scan_start = jiffies;
priv->scan_pass_start = priv->scan_start;
@@ -3352,13 +3355,18 @@ static void iwl3945_rx_scan_complete_notif(struct iwl3945_priv *priv,
cancel_delayed_work(&priv->scan_check);
IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
- (priv->scan_bands == 2) ? "2.4" : "5.2",
+ (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+ "2.4" : "5.2",
jiffies_to_msecs(elapsed_jiffies
(priv->scan_pass_start, jiffies)));
- /* Remove this scanned band from the list
- * of pending bands to scan */
- priv->scan_bands--;
+ /* Remove this scanned band from the list of pending
+ * bands to scan, band G precedes A in order of scanning
+ * as seen in iwl3945_bg_request_scan */
+ if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+ priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+ else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ))
+ priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
/* If a request to abort was given, or the scan did not succeed
* then we reset the scan state machine and terminate,
@@ -4972,7 +4980,7 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel);
if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+ IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
scan_ch->channel);
continue;
}
@@ -6315,21 +6323,16 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
/* flags + rate selection */
- switch (priv->scan_bands) {
- case 2:
+ if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
scan->good_CRC_th = 0;
band = IEEE80211_BAND_2GHZ;
- break;
-
- case 1:
+ } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
scan->good_CRC_th = IWL_GOOD_CRC_TH;
band = IEEE80211_BAND_5GHZ;
- break;
-
- default:
+ } else {
IWL_WARNING("Invalid scan band count\n");
goto done;
}
@@ -6770,7 +6773,7 @@ static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co
ch_info = iwl3945_get_channel_info(priv, conf->channel->band,
conf->channel->hw_value);
if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n",
+ IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n",
conf->channel->hw_value, conf->channel->band);
IWL_DEBUG_MAC80211("leave - invalid channel\n");
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 883b42f..5ed16ce 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -1774,7 +1774,10 @@ static int iwl4965_scan_initiate(struct iwl_priv *priv)
}
IWL_DEBUG_INFO("Starting scan...\n");
- priv->scan_bands = 2;
+ if (priv->cfg->sku & IWL_SKU_G)
+ priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+ if (priv->cfg->sku & IWL_SKU_A)
+ priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
set_bit(STATUS_SCANNING, &priv->status);
priv->scan_start = jiffies;
priv->scan_pass_start = priv->scan_start;
@@ -3023,8 +3026,9 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
if (index != -1) {
- int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index);
#ifdef CONFIG_IWL4965_HT
+ int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index);
+
if (tid != MAX_TID_COUNT)
priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
if (iwl4965_queue_space(&txq->q) > txq->q.low_mark &&
@@ -3276,13 +3280,18 @@ static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv,
cancel_delayed_work(&priv->scan_check);
IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
- (priv->scan_bands == 2) ? "2.4" : "5.2",
+ (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+ "2.4" : "5.2",
jiffies_to_msecs(elapsed_jiffies
(priv->scan_pass_start, jiffies)));
- /* Remove this scanned band from the list
- * of pending bands to scan */
- priv->scan_bands--;
+ /* Remove this scanned band from the list of pending
+ * bands to scan, band G precedes A in order of scanning
+ * as seen in iwl_bg_request_scan */
+ if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+ priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+ else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ))
+ priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
/* If a request to abort was given, or the scan did not succeed
* then we reset the scan state machine and terminate,
@@ -3292,7 +3301,7 @@ static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv,
clear_bit(STATUS_SCAN_ABORTING, &priv->status);
} else {
/* If there are more bands on this scan pass reschedule */
- if (priv->scan_bands > 0)
+ if (priv->scan_bands)
goto reschedule;
}
@@ -4635,10 +4644,9 @@ static int iwl4965_get_channels_for_scan(struct iwl_priv *priv,
scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq);
- ch_info = iwl_get_channel_info(priv, band,
- scan_ch->channel);
+ ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+ IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
scan_ch->channel);
continue;
}
@@ -5830,8 +5838,7 @@ static void iwl4965_bg_request_scan(struct work_struct *data)
scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
- switch (priv->scan_bands) {
- case 2:
+ if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
scan->tx_cmd.rate_n_flags =
iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
@@ -5839,17 +5846,13 @@ static void iwl4965_bg_request_scan(struct work_struct *data)
scan->good_CRC_th = 0;
band = IEEE80211_BAND_2GHZ;
- break;
-
- case 1:
+ } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
scan->tx_cmd.rate_n_flags =
iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
RATE_MCS_ANT_B_MSK);
scan->good_CRC_th = IWL_GOOD_CRC_TH;
band = IEEE80211_BAND_5GHZ;
- break;
-
- default:
+ } else {
IWL_WARNING("Invalid scan band count\n");
goto done;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
