From: Alagu Sankar <alagusankar@xxxxxxxxxxxxxxx>
Receive descriptor of sdio device does not include the rssi. notify
mac80211 accordingly. Without the fix, the rssi value indicated by
iw changes between the actual value and -95.
Signed-off-by: Alagu Sankar <alagusankar@xxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index f025363..21adcad 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1646,9 +1646,16 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
hdr = (struct ieee80211_hdr *)skb->data;
rx_status = IEEE80211_SKB_RXCB(skb);
rx_status->chains |= BIT(0);
- rx_status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
- rx->ppdu.combined_rssi;
- rx_status->flag &= ~RX_FLAG_NO_SIGNAL_VAL;
+
+ if (ar->hif.bus == ATH10K_BUS_SDIO) {
+ /* SDIO firmware does not provide signal */
+ rx_status->signal = 0;
+ rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
+ } else {
+ rx_status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
+ rx->ppdu.combined_rssi;
+ rx_status->flag &= ~RX_FLAG_NO_SIGNAL_VAL;
+ }
spin_lock_bh(&ar->data_lock);
ch = ar->scan_channel;
--
1.9.1
