From: Dedy Lansky <qca_dlansky@xxxxxxxxxxxxxxxx>
Re-arrange the code to have dedicated function for device configuration
which takes place before FW starts running.
Signed-off-by: Dedy Lansky <qca_dlansky@xxxxxxxxxxxxxxxx>
Signed-off-by: Maya Erez <qca_merez@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/wil6210/main.c | 40 ++++++++++++++++++---------------
1 file changed, 22 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index e2ea490..927e332 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -930,6 +930,27 @@ int wil_ps_update(struct wil6210_priv *wil, enum wmi_ps_profile_type ps_profile)
return rc;
}
+static void wil_pre_fw_config(struct wil6210_priv *wil)
+{
+ /* Mark FW as loaded from host */
+ wil_s(wil, RGF_USER_USAGE_6, 1);
+
+ /* clear any interrupts which on-card-firmware
+ * may have set
+ */
+ wil6210_clear_irq(wil);
+ /* CAF_ICR - clear and mask */
+ /* it is W1C, clear by writing back same value */
+ wil_s(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0);
+ wil_w(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0);
+
+ if (wil->fw_calib_result > 0) {
+ __le32 val = cpu_to_le32(wil->fw_calib_result |
+ (CALIB_RESULT_SIGNATURE << 8));
+ wil_w(wil, RGF_USER_FW_CALIB_RESULT, (u32 __force)val);
+ }
+}
+
/*
* We reset all the structures, and we reset the UMAC.
* After calling this routine, you're expected to reload
@@ -1023,24 +1044,7 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
if (rc)
return rc;
- /* Mark FW as loaded from host */
- wil_s(wil, RGF_USER_USAGE_6, 1);
-
- /* clear any interrupts which on-card-firmware
- * may have set
- */
- wil6210_clear_irq(wil);
- /* CAF_ICR - clear and mask */
- /* it is W1C, clear by writing back same value */
- wil_s(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0);
- wil_w(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0);
-
- if (wil->fw_calib_result > 0) {
- __le32 val = cpu_to_le32(wil->fw_calib_result |
- (CALIB_RESULT_SIGNATURE << 8));
- wil_w(wil, RGF_USER_FW_CALIB_RESULT, (u32 __force)val);
- }
-
+ wil_pre_fw_config(wil);
wil_release_cpu(wil);
}
--
1.9.1
