Hi Hans, On Fri, 2017-08-25 at 16:03 +0200, Hans de Goede wrote: > Hi, > > On 25-08-17 15:55, Jörg Krause wrote: > > Hi, > > > > On Fri, 2017-06-16 at 15:14 +0200, Hans de Goede wrote: > > > The brcm43430 chip needs different firmware files for chip revision 0 > > > and 1. The file currently in linux-firmware is for revision 1 only. > > > > > > This commit makes brcmfmac request brcmfmac43430a0-sdio.bin instead > > > of brcmfmac43430-sdio.bin for revision 0 chips. > > > > > > Note that the behavior for revision 1 chips is not changed, ideally those > > > would load brcmfmac43430a1-sdio.bin, but that will break existing setups. > > > > > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > > > --- > > > drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 7 +++++-- > > > 1 file changed, 5 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c > > > index 4ed40c94bda9..5125aeeb5310 100644 > > > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c > > > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c > > > @@ -612,7 +612,9 @@ BRCMF_FW_NVRAM_DEF(43340, "brcmfmac43340-sdio.bin", "brcmfmac43340-sdio.txt"); > > > BRCMF_FW_NVRAM_DEF(4335, "brcmfmac4335-sdio.bin", "brcmfmac4335-sdio.txt"); > > > BRCMF_FW_NVRAM_DEF(43362, "brcmfmac43362-sdio.bin", "brcmfmac43362-sdio.txt"); > > > BRCMF_FW_NVRAM_DEF(4339, "brcmfmac4339-sdio.bin", "brcmfmac4339-sdio.txt"); > > > -BRCMF_FW_NVRAM_DEF(43430, "brcmfmac43430-sdio.bin", "brcmfmac43430-sdio.txt"); > > > +BRCMF_FW_NVRAM_DEF(43430A0, "brcmfmac43430a0-sdio.bin", "brcmfmac43430a0-sdio.txt"); > > > +/* Note the names are not postfixed with a1 for backward compatibility */ > > > +BRCMF_FW_NVRAM_DEF(43430A1, "brcmfmac43430-sdio.bin", "brcmfmac43430-sdio.txt"); > > > BRCMF_FW_NVRAM_DEF(43455, "brcmfmac43455-sdio.bin", "brcmfmac43455-sdio.txt"); > > > BRCMF_FW_NVRAM_DEF(4354, "brcmfmac4354-sdio.bin", "brcmfmac4354-sdio.txt"); > > > BRCMF_FW_NVRAM_DEF(4356, "brcmfmac4356-sdio.bin", "brcmfmac4356-sdio.txt"); > > > @@ -630,7 +632,8 @@ static struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = { > > > BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, 4335), > > > BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, 43362), > > > BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339), > > > - BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, 43430), > > > + BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43430_CHIP_ID, 0x00000001, 43430A0), > > > + BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFE, 43430A1), > > > BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, 43455), > > > BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354), > > > BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356) > > > > Unfortunately, there is no "brcmfmac43430a0-sdio.bin" in linux- > > firmware. Therefore, my custom board fails: > > > > # [ 24.894241] brcmfmac mmc0:0001:1: Direct firmware load for > > brcm/brcmfmac43430a0-sdio.bin failed with error -2 > > [ 25.914322] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): > > clkctl 0x50 > > [ 26.934186] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): > > clkctl 0x50 > > > > Can someone provide the firmware file, please? > > I've put all the versions I've been able to find here: > > http://jwrdegoede.danny.cz/brcm-firmware/ > > Note that the 7.x.y.z version does not seem to have any useful meaning, > higher is not necessarily newer :| > > [hans@shalem brcm-firmware]$ for i in brcmfmac43430a0-sdio.bin*; do echo $i && strings $i | tail -n 1; done > brcmfmac43430a0-sdio.bin.7.10.1.244.ucode940.1020 > 43430a0-roml/sdio-g-pool-p2p-pno-pktfilter-keepalive-aoe-mchan-proptxstatus-lpc-wl11u-rcc-fmc-wepso-ccx-okc-fbt-noccxaka-txpwr-ampduhostreorder-clm_43xx_lg-ndoe Version: 7.10.1.244 CRC: 73c82137 Date: Fri 2016-07-01 18:03:15 KST Ucode Ver: 940.1020 FWID: 01-bae8afee > brcmfmac43430a0-sdio.bin.7.10.226.49.no_ucode_version > 43430a0-roml/sdio-g-pool-p2p-pno-pktfilter-keepalive-aoe-mchan-proptxstatus-lpc-wl11u-rcc-fmc-wepso-ccx-okc-fbt-noccxaka-txpwr-ampduhostreorder-clm_43xx_lg Version: 7.10.226.49 CRC: bf92cb0b Date: Fri 2014-06-06 14:55:15 KST FWID 01-8962686a > brcmfmac43430a0-sdio.bin.7.10.68.5.ucode997.0 > 43430a0-roml/sdio-g-pool-p2p-pno-pktfilter-keepalive-aoe-mchan-proptxstatus-ampduhostreorder-lpc-wl11u-rcc-fmc-wepso-ccx-okc-anqpo-ltecx-sr-ndoe Version: 7.10.68.5 CRC: 5168922 Date: Thu 2015-04-30 04:20:43 PDT Ucode Ver: 997.0 FWID: 01-2bde7d77 > > So date wise brcmfmac43430a0-sdio.bin.7.10.1.244.ucode940.1020 is the newest > and IIRC that one works well for me. > > ucode version wise, brcmfmac43430a0-sdio.bin.7.10.68.5.ucode997.0 is newer, > but the .0 in 997.0 makes it feel like an unproven release to me. Thanks for the files! I've tested with brcmfmac43430a0-sdio.bin.7.10.1.244.ucode940.1020 and brcmfmac is happy: brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Jul 1 2016 18:02:40 version 7.10.1 (A0 Station/P2P feature) FWID 01-bae8afee Where did you got the firmware files from? @Broadcom: Is there any "official" firmware? Jörg