On 08/07/2017 8:27, Arend van Spriel wrote:
On 8/3/2017 11:37 AM, Wright Feng wrote:
From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
Add support for CYW4373 SDIO/USB chipset.
CYW4373 is a 1x1 dual-band 11ac chipset with 20/40/80Mhz channel support.
It's a WiFi/BT combo device.
Reviewed-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
---
v2: add new chip(4737) info in commit message
comment below...
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 1 +
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c | 2 ++
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 +++-
drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 9
++++++++-
drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h | 3 +++
include/linux/mmc/sdio_ids.h | 1 +
6 files changed, 18 insertions(+), 2 deletions(-)
[...]
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index b733eb4..abacd54 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -39,6 +39,7 @@
#define SDIO_DEVICE_ID_BROADCOM_43455 0xa9bf
#define SDIO_DEVICE_ID_BROADCOM_4354 0x4354
#define SDIO_DEVICE_ID_BROADCOM_4356 0x4356
+#define SDIO_DEVICE_ID_CYPRESS_4373 0x4373
So is there no specific Cypress SDIO vendor ID?
There is no Cypress SDIO vid. I believe the legacy chips 4343w ...etc.
shipped are still using BRCM SDIO vid. Also, 4373 project was initiated
in Broadcom so the default id was set to the Broadcom id. Will it a
requirement to add Cypress vid here?
#define SDIO_VENDOR_ID_INTEL 0x0089
#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402
.
