Search Linux Wireless

[PATCH 04/10] wil6210: check no_fw_recovery in resume failure recovery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Reset 11ad device on resume failure only if no_fw_recovery
is not set.

Signed-off-by: Maya Erez <qca_merez@xxxxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/wil6210/pm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wil6210/pm.c b/drivers/net/wireless/ath/wil6210/pm.c
index ce1f384..4548829 100644
--- a/drivers/net/wireless/ath/wil6210/pm.c
+++ b/drivers/net/wireless/ath/wil6210/pm.c
@@ -85,7 +85,9 @@ static int wil_resume_keep_radio_on(struct wil6210_priv *wil)
 	/* Send WMI resume request to the device */
 	rc = wmi_resume(wil);
 	if (rc) {
-		wil_err(wil, "device failed to resume (%d), resetting\n", rc);
+		wil_err(wil, "device failed to resume (%d)\n", rc);
+		if (no_fw_recovery)
+			goto out;
 		rc = wil_down(wil);
 		if (rc) {
 			wil_err(wil, "wil_down failed (%d)\n", rc);
-- 
1.9.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux