Search Linux Wireless

[PATCH 29/34] brcmfmac: stabilise the value of ->sbwad in use for some xfer routines.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The IO functions operate within the Chipcommon IO window. Explicitly
set this, rather than relying on the last initialisation IO access to
leave it set to the right value by chance.

Signed-off-by: Ian Molton <ian@xxxxxxxxxxxxxx>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 ++++----
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c   | 5 +++++
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   | 1 +
 3 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index ab015bad02f2..dcdebe8e8ff4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -528,7 +528,7 @@ int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 
 int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 {
-	u32 addr = sdiodev->sbwad;
+	u32 addr = sdiodev->cc_core->base;
 	int err = 0;
 
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len);
@@ -551,7 +551,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 {
 	struct sk_buff *glom_skb = NULL;
 	struct sk_buff *skb;
-	u32 addr = sdiodev->sbwad;
+	u32 addr = sdiodev->cc_core->base;
 	int err = 0;
 
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n",
@@ -592,7 +592,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 {
 	struct sk_buff *mypkt;
-	u32 addr = sdiodev->sbwad;
+	u32 addr = sdiodev->cc_core->base;
 	int err;
 
 	mypkt = brcmu_pkt_buf_get_skb(nbytes);
@@ -625,7 +625,7 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 			 struct sk_buff_head *pktq)
 {
 	struct sk_buff *skb;
-	u32 addr = sdiodev->sbwad;
+	u32 addr = sdiodev->cc_core->base;
 	int err;
 
 	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 19f40a1ee418..2a52f48bdddc 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3821,6 +3821,11 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	if (!bus->sdio_core)
 		goto fail;
 
+	/* Pick up the CHIPCOMMON core info struct, used for bulk IO in bcmsdh.c */
+	sdiodev->cc_core = brcmf_chip_get_core(bus->ci, BCMA_CORE_CHIPCOMMON);
+	if (!sdiodev->cc_core)
+		goto fail;
+
 	sdiodev->settings = brcmf_get_module_param(sdiodev->dev,
 						   BRCMF_BUSTYPE_SDIO,
 						   bus->ci->chip,
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index e2324a78249b..a5a05d1a34bf 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -178,6 +178,7 @@ struct brcmf_sdio_dev {
 	struct sdio_func *func[SDIO_MAX_FUNCS];
 	u8 num_funcs;			/* Supported funcs on client */
 	u32 sbwad;			/* Save backplane window address */
+	struct brcmf_core *cc_core;	/* chipcommon core info struct */
 	struct brcmf_sdio *bus;
 	struct device *dev;
 	struct brcmf_bus *bus_if;
-- 
2.11.0




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux