We probably need to look up the value in future, but this has to be better for now.
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 5214556465d1..5324068a945d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -59,6 +59,11 @@
#define BRCMF_DEFAULT_RXGLOM_SIZE 32 /* max rx frames in glom chain */
+/* This is a huge hack - we should look up this value and refer to that - who knows if it varies from chip to chip...
+ * however this has got to be better than just letting ->sbwad dangle after the last bit of IO during setup
+ */
+#define FIXME_CHIPCOMMON_BASE 0x18000000
+
struct brcmf_sdiod_freezer {
atomic_t freezing;
atomic_t thread_count;
@@ -557,7 +562,7 @@ int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
{
- u32 addr = sdiodev->sbwad;
+ u32 addr = FIXME_CHIPCOMMON_BASE;
int err = 0;
brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len);
@@ -577,7 +582,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
{
struct sk_buff *glom_skb;
struct sk_buff *skb;
- u32 addr = sdiodev->sbwad;
+ u32 addr = FIXME_CHIPCOMMON_BASE;
int err = 0;
brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n",
@@ -616,7 +621,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
{
struct sk_buff *mypkt;
- u32 addr = sdiodev->sbwad;
+ u32 addr = FIXME_CHIPCOMMON_BASE;
int err;
mypkt = brcmu_pkt_buf_get_skb(nbytes);
@@ -644,7 +649,7 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
struct sk_buff_head *pktq)
{
struct sk_buff *skb;
- u32 addr = sdiodev->sbwad;
+ u32 addr = FIXME_CHIPCOMMON_BASE;
int err;
brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen);
--
2.11.0
