Search Linux Wireless

Re: [PATCH] wlcore: add missing nvs file name info for wilink8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Jul 05, 2017 at 01:06:54AM -0700, Tony Lindgren wrote:
> > > Not sure if this really is a regression as we've always had a bogus
> > > wl1271-nvs.bin in linux-firmware.git. Sure would be nice to fix it,
> > > but going back to using a generic wl1271-nvs.bin sure does not seem
> > > like a good long term fix to me :)
> > A lot of legacy here...
> > Wl1271-nvs has been used mainly with wilink6/7 and indeed was device specific
> > Holding calibration info etc.
> > When they started with wilink8 the device specific configuration that was 
> > Part of it has switched to wl18xx-conf.bin and using the wlaconf tool for setting it.
> > Also there is no calibration specific info per device with wilink8 so the wl18xx-conf.bin
> > The only thing left in wl1271-nvs.bin for wilink8 was the mac address override.
> 
> And the default wl1271-nvs.bin sets the mac address to a bogus deadbeef address,
> so it's wrong to use and totally broken for distros :(

So use something like the following pseudo-code?

if (fw->mac_address == deadbeef) {
    fw->mac_address = get_random_mac();
    dev_warn(dev, "Detected unconfigured wl1271-nvs.bin.\n"
        "Your device will run with limited performance.\n"
        "Please use ti-utils to configure your device.\n");
}

-- Sebastian

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux