Search Linux Wireless

[PATCH v2 07/10] rtlwifi: Uses addr1 instead DA to determine broadcast and multicast addr.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>

We should check addr1 to indicate a packet as broadcast or multicast
in tx desc. An obvious example, a STA transmit an *unicast* ARP packet
where addr1 and DA are the addresses of AP and broadcast respectively.

Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>
Cc: Birming Chiu <birming@xxxxxxxxxxx>
Cc: Shaofu <shaofu@xxxxxxxxxxx>
Cc: Steven Ting <steventing@xxxxxxxxxxx>
---
v2 - no changes
---
 drivers/net/wireless/realtek/rtlwifi/base.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/base.c b/drivers/net/wireless/realtek/rtlwifi/base.c
index 7aa3c39c9c5c..464f14450f75 100644
--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -1166,9 +1166,9 @@ void rtl_get_tcb_desc(struct ieee80211_hw *hw,
 			}
 		}
 
-		if (is_multicast_ether_addr(ieee80211_get_DA(hdr)))
+		if (is_multicast_ether_addr(hdr->addr1))
 			tcb_desc->multicast = 1;
-		else if (is_broadcast_ether_addr(ieee80211_get_DA(hdr)))
+		else if (is_broadcast_ether_addr(hdr->addr1))
 			tcb_desc->broadcast = 1;
 
 		_rtl_txrate_selectmode(hw, sta, tcb_desc);
-- 
2.12.3




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux