Search Linux Wireless

WPA: EAPOL-Key timeout

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I am trying to use hostapd to set up a wifi access point on my Beaglebone Black. With no WPA security everything works fine. When I add WPA security, I can't log into my wifi network anymore.

This is my /etc/hostapd/hostapd.conf file

interface=wlan2
driver=nl80211
ssid=virtual_serial_port_br38400
hw_mode=g
channel=11
wpa=1
wpa_passphrase=password
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP
wpa_ptk_rekey=600

and this is hostapd log when I try to access the network through my smartphone. There are several WPA: EAPOL-Key timeout error messages. How can I fix this problem?

nl80211: Frame TX command accepted; cookie 0xdcb23100
nl80211: Event message available
nl80211: Drv Event 60 (NL80211_CMD_FRAME_TX_STATUS) received for wlan2 nl80211: MLME event 60 (NL80211_CMD_FRAME_TX_STATUS) on wlan2(40:5d:82:d6:88:73) A1=ec:9b:f3:87:e1:1c A2=40:5d:82:d6:88:73 nl80211: MLME event frame - hexdump(len=125): 50 00 3a 01 ec 9b f3 87 e1 1c 40 5d 82 d6 88 73 40 5d 82 d6 88 73 20 46 00 00 00 00 00 00 00 00 64 00 11 04 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 0c 12 18 24 03 01 0b 2a 01 04 32 04 30 48 60 6c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX status event
wlan2: Event TX_STATUS (18) received
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=40:5d:82:d6:88:73 A2=ec:9b:f3:87:e1:1c nl80211: MLME event frame - hexdump(len=41): b0 00 3a 01 40 5d 82 d6 88 73 ec 9b f3 87 e1 1c 40 5d 82 d6 88 73 70 69 00 00 01 00 00 00 dd 09 00 10 18 02 00 00 10 00 00
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-48 stype=11 len=41
wlan2: Event RX_MGMT (20) received
mgmt::auth
authentication: STA=ec:9b:f3:87:e1:1c auth_alg=0 auth_transaction=1 status_code=0 wep=0
  New STA
ap_sta_add: register ap_handle_timer timeout for ec:9b:f3:87:e1:1c (300 seconds - ap_max_inactivity) wlan2: STA ec:9b:f3:87:e1:1c IEEE 802.11: authentication OK (open system) wlan2: STA ec:9b:f3:87:e1:1c MLME: MLME-AUTHENTICATE.indication(ec:9b:f3:87:e1:1c, OPEN_SYSTEM) wlan2: STA ec:9b:f3:87:e1:1c MLME: MLME-DELETEKEYS.request(ec:9b:f3:87:e1:1c) authentication reply: STA=ec:9b:f3:87:e1:1c auth_alg=0 auth_transaction=2 resp=0 (IE len=0) nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xb0 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=0 offchanok=0 CMD_FRAME - hexdump(len=30): b0 00 00 00 ec 9b f3 87 e1 1c 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 00 00 02 00 00 00
nl80211: Frame TX command accepted; cookie 0xdcac1280
nl80211: Event message available
nl80211: Drv Event 60 (NL80211_CMD_FRAME_TX_STATUS) received for wlan2 nl80211: MLME event 60 (NL80211_CMD_FRAME_TX_STATUS) on wlan2(40:5d:82:d6:88:73) A1=ec:9b:f3:87:e1:1c A2=40:5d:82:d6:88:73 nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 ec 9b f3 87 e1 1c 40 5d 82 d6 88 73 40 5d 82 d6 88 73 30 46 00 00 02 00 00 00
nl80211: Frame TX status event
wlan2: Event TX_STATUS (18) received
mgmt::auth cb
wlan2: STA ec:9b:f3:87:e1:1c IEEE 802.11: authenticated
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=40:5d:82:d6:88:73 A2=ec:9b:f3:87:e1:1c nl80211: MLME event frame - hexdump(len=119): 00 00 3a 01 40 5d 82 d6 88 73 ec 9b f3 87 e1 1c 40 5d 82 d6 88 73 80 69 31 04 0a 00 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 24 30 48 6c 32 04 0c 12 18 60 21 02 09 13 24 02 01 0d 6b 01 0f dd 09 00 10 18 02 00 00 10 00 00 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-50 stype=0 len=119
wlan2: Event RX_MGMT (20) received
mgmt::assoc_req
association request: STA=ec:9b:f3:87:e1:1c capab_info=0x431 listen_interval=10
  new AID 1
wlan2: STA ec:9b:f3:87:e1:1c IEEE 802.11: association OK (aid 1) nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x10 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=0 offchanok=0 CMD_FRAME - hexdump(len=56): 10 00 00 00 ec 9b f3 87 e1 1c 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 11 04 00 00 01 c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX command accepted; cookie 0xdcba1dc0
nl80211: Event message available
nl80211: Drv Event 60 (NL80211_CMD_FRAME_TX_STATUS) received for wlan2 nl80211: MLME event 60 (NL80211_CMD_FRAME_TX_STATUS) on wlan2(40:5d:82:d6:88:73) A1=ec:9b:f3:87:e1:1c A2=40:5d:82:d6:88:73 nl80211: MLME event frame - hexdump(len=56): 10 00 3a 01 ec 9b f3 87 e1 1c 40 5d 82 d6 88 73 40 5d 82 d6 88 73 40 46 11 04 00 00 01 c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX status event
wlan2: Event TX_STATUS (18) received
mgmt::assoc_resp cb
wlan2: STA ec:9b:f3:87:e1:1c IEEE 802.11: associated (aid 1) wlan2: STA ec:9b:f3:87:e1:1c MLME: MLME-ASSOCIATE.indication(ec:9b:f3:87:e1:1c) wlan2: STA ec:9b:f3:87:e1:1c MLME: MLME-DELETEKEYS.request(ec:9b:f3:87:e1:1c) wpa_driver_nl80211_set_key: ifindex=3 (wlan2) alg=0 addr=0x1b29c40 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=ec:9b:f3:87:e1:1c
nl80211: sta_remove -> DEL_STATION wlan2 ec:9b:f3:87:e1:1c --> -2 (No such file or directory)
nl80211: Add STA ec:9b:f3:87:e1:1c
* supported rates - hexdump(len=12): 82 84 8b 96 24 30 48 6c 0c 12 18 60
  * aid=1
  * listen_interval=10
  * capability=0x431
  * flags set=0x4 mask=0x4
wlan2: STA ec:9b:f3:87:e1:1c WPA: event 1 notification
wpa_driver_nl80211_set_key: ifindex=3 (wlan2) alg=0 addr=0x1b29c40 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=ec:9b:f3:87:e1:1c
IEEE 802.1X: Ignore STA - 802.1X not enabled or forced for WPS
wlan2: STA ec:9b:f3:87:e1:1c WPA: start authentication
WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=3 (wlan2) alg=0 addr=0x1b29c40 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=ec:9b:f3:87:e1:1c
wlan2: STA ec:9b:f3:87:e1:1c IEEE 802.1X: unauthorizing port
WPA: ec:9b:f3:87:e1:1c WPA_PTK_GROUP entering state IDLE
WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state AUTHENTICATION WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state AUTHENTICATION2
WPA: Re-initialize GMK/Counter on first station
Get randomness: len=32 entropy=216
GMK - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=184
Key Counter - hexdump(len=32): [REMOVED]
Get randomness: len=16 entropy=152
GTK - hexdump(len=32): [REMOVED]
wpa_driver_nl80211_set_key: ifindex=3 (wlan2) alg=2 addr=0x76a80 key_idx=1 set_tx=1 seq_len=0 key_len=32
   broadcast key
Get randomness: len=32 entropy=136
WPA: Assign ANonce - hexdump(len=32): bd cf 22 b5 cf 4e 2b 6d b1 f3 75 44 aa 84 e0 c4 33 71 fe 85 ce 02 24 c4 f8 fe dc a1 c5 67 79 24
WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state INITPSK
Searching a PSK for ec:9b:f3:87:e1:1c p2p_dev_addr=00:00:00:00:00:00 prev_psk=(nil) Searching a PSK for ec:9b:f3:87:e1:1c p2p_dev_addr=00:00:00:00:00:00 prev_psk=(nil)
WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state PTKSTART
wlan2: STA ec:9b:f3:87:e1:1c WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Use EAPOL-Key timeout of 100 ms (retry counter 1)
hostapd_new_assoc_sta: reschedule ap_handle_timer timeout for ec:9b:f3:87:e1:1c (300 seconds - ap_max_inactivity)
nl80211: Event message available
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan2
nl80211: New station ec:9b:f3:87:e1:1c
wlan2: Event EAPOL_TX_STATUS (40) received
IEEE 802.1X: ec:9b:f3:87:e1:1c TX status - version=2 type=3 length=95 - ack=1
WPA: EAPOL-Key TX status for STA ec:9b:f3:87:e1:1c ack=1
WPA: Increase initial EAPOL-Key 1/4 timeout by 1000 ms because of acknowledged frame
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=f0:7d:68:73:90:b4 nl80211: MLME event frame - hexdump(len=57): 40 00 00 00 ff ff ff ff ff ff f0 7d 68 73 90 b4 ff ff ff ff ff ff 50 c7 00 0c 53 2e 41 6e 6e 61 20 67 75 65 73 74 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 03 01 09
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-56 stype=4 len=57
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=f0:7d:68:73:90:b4 nl80211: MLME event frame - hexdump(len=45): 40 00 00 00 ff ff ff ff ff ff f0 7d 68 73 90 b4 ff ff ff ff ff ff 60 c7 00 00 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 03 01 09
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-56 stype=4 len=45
nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=1 offchanok=0 CMD_FRAME - hexdump(len=125): 50 00 00 00 f0 7d 68 73 90 b4 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 0c 12 18 24 03 01 0b 2a 01 04 32 04 30 48 60 6c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=f0:7d:68:73:90:b4 nl80211: MLME event frame - hexdump(len=57): 40 00 00 00 ff ff ff ff ff ff f0 7d 68 73 90 b4 ff ff ff ff ff ff d0 c7 00 0c 53 2e 41 6e 6e 61 20 67 75 65 73 74 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 03 01 0b
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-50 stype=4 len=57
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=f0:7d:68:73:90:b4 nl80211: MLME event frame - hexdump(len=45): 40 00 00 00 ff ff ff ff ff ff f0 7d 68 73 90 b4 ff ff ff ff ff ff e0 c7 00 00 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 03 01 0b
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-50 stype=4 len=45
nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=1 offchanok=0 CMD_FRAME - hexdump(len=125): 50 00 00 00 f0 7d 68 73 90 b4 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 0c 12 18 24 03 01 0b 2a 01 04 32 04 30 48 60 6c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=f0:7d:68:73:90:b4 nl80211: MLME event frame - hexdump(len=57): 40 00 00 00 ff ff ff ff ff ff f0 7d 68 73 90 b4 ff ff ff ff ff ff 10 c8 00 0c 53 2e 41 6e 6e 61 20 67 75 65 73 74 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 03 01 0c
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-50 stype=4 len=57
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=f0:7d:68:73:90:b4 nl80211: MLME event frame - hexdump(len=45): 40 00 00 00 ff ff ff ff ff ff f0 7d 68 73 90 b4 ff ff ff ff ff ff 20 c8 00 00 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 03 01 0c
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-50 stype=4 len=45
nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=1 offchanok=0 CMD_FRAME - hexdump(len=125): 50 00 00 00 f0 7d 68 73 90 b4 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 0c 12 18 24 03 01 0b 2a 01 04 32 04 30 48 60 6c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX command accepted (no ACK); cookie 0x0
wlan2: STA ec:9b:f3:87:e1:1c WPA: EAPOL-Key timeout
WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state PTKSTART
wlan2: STA ec:9b:f3:87:e1:1c WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 2)
wlan2: Event EAPOL_TX_STATUS (40) received
IEEE 802.1X: ec:9b:f3:87:e1:1c TX status - version=2 type=3 length=95 - ack=1
WPA: EAPOL-Key TX status for STA ec:9b:f3:87:e1:1c ack=1
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=f0:7d:68:73:90:b4 nl80211: MLME event frame - hexdump(len=45): 40 00 00 00 ff ff ff ff ff ff f0 7d 68 73 90 b4 ff ff ff ff ff ff 90 c8 00 00 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 03 01 0d
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-50 stype=4 len=45
nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=1 offchanok=0 CMD_FRAME - hexdump(len=125): 50 00 00 00 f0 7d 68 73 90 b4 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 0c 12 18 24 03 01 0b 2a 01 04 32 04 30 48 60 6c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX command accepted (no ACK); cookie 0x0
wlan2: STA ec:9b:f3:87:e1:1c WPA: EAPOL-Key timeout
WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state PTKSTART
wlan2: STA ec:9b:f3:87:e1:1c WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 3)
wlan2: Event EAPOL_TX_STATUS (40) received
IEEE 802.1X: ec:9b:f3:87:e1:1c TX status - version=2 type=3 length=95 - ack=1
WPA: EAPOL-Key TX status for STA ec:9b:f3:87:e1:1c ack=1
wlan2: STA ec:9b:f3:87:e1:1c WPA: EAPOL-Key timeout
WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state PTKSTART
wlan2: STA ec:9b:f3:87:e1:1c WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 4)
wlan2: Event EAPOL_TX_STATUS (40) received
IEEE 802.1X: ec:9b:f3:87:e1:1c TX status - version=2 type=3 length=95 - ack=1
WPA: EAPOL-Key TX status for STA ec:9b:f3:87:e1:1c ack=1
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=44:80:eb:73:69:00 nl80211: MLME event frame - hexdump(len=89): 40 00 00 00 ff ff ff ff ff ff 44 80 eb 73 69 00 ff ff ff ff ff ff 10 9f 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 09 2d 1a 2c 01 03 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 07 00 50 f2 08 00 00 00 7f 05 00 00 0a 02 01
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-84 stype=4 len=89
nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=1 offchanok=0 CMD_FRAME - hexdump(len=125): 50 00 00 00 44 80 eb 73 69 00 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 0c 12 18 24 03 01 0b 2a 01 04 32 04 30 48 60 6c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=44:80:eb:73:69:00 nl80211: MLME event frame - hexdump(len=89): 40 00 00 00 ff ff ff ff ff ff 44 80 eb 73 69 00 ff ff ff ff ff ff 70 9f 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0a 2d 1a 2c 01 03 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 07 00 50 f2 08 00 00 00 7f 05 00 00 0a 02 01
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-68 stype=4 len=89
nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=1 offchanok=0 CMD_FRAME - hexdump(len=125): 50 00 00 00 44 80 eb 73 69 00 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 0c 12 18 24 03 01 0b 2a 01 04 32 04 30 48 60 6c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=44:80:eb:73:69:00 nl80211: MLME event frame - hexdump(len=89): 40 00 00 00 ff ff ff ff ff ff 44 80 eb 73 69 00 ff ff ff ff ff ff 90 9f 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 2c 01 03 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 07 00 50 f2 08 00 00 00 7f 05 00 00 0a 02 01
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-68 stype=4 len=89
nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=1 offchanok=0 CMD_FRAME - hexdump(len=125): 50 00 00 00 44 80 eb 73 69 00 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 0c 12 18 24 03 01 0b 2a 01 04 32 04 30 48 60 6c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=44:80:eb:73:69:00 nl80211: MLME event frame - hexdump(len=89): 40 00 00 00 ff ff ff ff ff ff 44 80 eb 73 69 00 ff ff ff ff ff ff b0 9f 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 2c 01 03 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 07 00 50 f2 08 00 00 00 7f 05 00 00 0a 02 01
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-72 stype=4 len=89
nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=1 offchanok=0 CMD_FRAME - hexdump(len=125): 50 00 00 00 44 80 eb 73 69 00 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 0c 12 18 24 03 01 0b 2a 01 04 32 04 30 48 60 6c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=44:80:eb:73:69:00 nl80211: MLME event frame - hexdump(len=89): 40 00 00 00 ff ff ff ff ff ff 44 80 eb 73 69 00 ff ff ff ff ff ff 10 a0 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0d 2d 1a 2c 01 03 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 07 00 50 f2 08 00 e8 00 7f 05 00 00 0a 02 01
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-98 stype=4 len=89
nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=1 offchanok=0 CMD_FRAME - hexdump(len=125): 50 00 00 00 44 80 eb 73 69 00 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 0c 12 18 24 03 01 0b 2a 01 04 32 04 30 48 60 6c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX command accepted (no ACK); cookie 0x0
wlan2: STA ec:9b:f3:87:e1:1c WPA: EAPOL-Key timeout
WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state PTKSTART
wlan2: STA ec:9b:f3:87:e1:1c WPA: PTKSTART: Retry limit 4 reached
WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state DISCONNECT
wpa_sta_disconnect STA ec:9b:f3:87:e1:1c
hostapd_wpa_auth_disconnect: WPA authenticator requests disconnect: STA ec:9b:f3:87:e1:1c reason 2 nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=0 offchanok=0 CMD_FRAME - hexdump(len=26): c0 00 00 00 ec 9b f3 87 e1 1c 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 02 00
nl80211: Frame TX command accepted; cookie 0xdcb23b80
wlan2: STA ec:9b:f3:87:e1:1c WPA: event 3 notification
wpa_driver_nl80211_set_key: ifindex=3 (wlan2) alg=0 addr=0x1b29c40 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=ec:9b:f3:87:e1:1c
WPA: wpa_sm_step() called recursively
ap_sta_disconnect: reschedule ap_handle_timer timeout for ec:9b:f3:87:e1:1c (5 seconds - AP_MAX_INACTIVITY_AFTER_DEAUTH)
WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state DISCONNECTED
WPA: ec:9b:f3:87:e1:1c WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=3 (wlan2) alg=0 addr=0x1b29c40 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=ec:9b:f3:87:e1:1c
wlan2: STA ec:9b:f3:87:e1:1c IEEE 802.1X: unauthorizing port
nl80211: Event message available
nl80211: Drv Event 60 (NL80211_CMD_FRAME_TX_STATUS) received for wlan2 nl80211: MLME event 60 (NL80211_CMD_FRAME_TX_STATUS) on wlan2(40:5d:82:d6:88:73) A1=ec:9b:f3:87:e1:1c A2=40:5d:82:d6:88:73 nl80211: MLME event frame - hexdump(len=26): c0 00 3a 01 ec 9b f3 87 e1 1c 40 5d 82 d6 88 73 40 5d 82 d6 88 73 20 47 02 00
nl80211: Frame TX status event
wlan2: Event TX_STATUS (18) received
mgmt::deauth cb
STA ec:9b:f3:87:e1:1c acknowledged deauth
Removing STA ec:9b:f3:87:e1:1c from kernel driver
nl80211: sta_remove -> DEL_STATION wlan2 ec:9b:f3:87:e1:1c --> 0 (Success) wlan2: STA ec:9b:f3:87:e1:1c MLME: MLME-DEAUTHENTICATE.indication(ec:9b:f3:87:e1:1c, 2) wlan2: STA ec:9b:f3:87:e1:1c MLME: MLME-DELETEKEYS.request(ec:9b:f3:87:e1:1c) wpa_driver_nl80211_set_key: ifindex=3 (wlan2) alg=0 addr=0x1b29c40 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=ec:9b:f3:87:e1:1c
nl80211: Event message available
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan2
nl80211: Delete station ec:9b:f3:87:e1:1c
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan2(40:5d:82:d6:88:73) A1=ff:ff:ff:ff:ff:ff A2=ec:9b:f3:87:e1:1c nl80211: MLME event frame - hexdump(len=151): 40 00 00 00 ff ff ff ff ff ff ec 9b f3 87 e1 1c ff ff ff ff ff ff e0 69 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 2d 00 17 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6b 01 0f dd 05 50 6f 9a 10 10 dd 13 00 90 4c 04 08 bf 0c 32 58 81 0f fa ff 00 00 fa ff 00 00 dd 07 00 50 f2 08 00 11 00 dd 09 00 10 18 02 00 00 10 00 00
nl80211: Frame event
nl80211: RX frame freq=2462 ssi_signal=-98 stype=4 len=132
nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=1 offchanok=0 CMD_FRAME - hexdump(len=125): 50 00 00 00 ec 1f 72 9b 19 10 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 1b 76 69 72 74 75 61 6c 5f 73 65 72 69 61 6c 5f 70 6f 72 74 5f 62 72 33 38 34 30 30 01 08 82 84 8b 96 0c 12 18 24 03 01 0b 2a 01 04 32 04 30 48 60 6c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 00 00 00 00 00 00 40
nl80211: Frame TX command accepted (no ACK); cookie 0x0
ap_handle_timer: ec:9b:f3:87:e1:1c flags=0x8080 timeout_next=3 wlan2: STA ec:9b:f3:87:e1:1c IEEE 802.11: deauthenticated due to local deauth request nl80211: sta_remove -> DEL_STATION wlan2 ec:9b:f3:87:e1:1c --> -2 (No such file or directory)
ap_free_sta: cancel ap_handle_timer for ec:9b:f3:87:e1:1c
Signal 2 received - terminating
hostapd_interface_deinit_free(0x1b276f0)
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
hostapd_interface_deinit(0x1b276f0)
hostapd_bss_deinit: deinit bss wlan2
wlan2: Flushing old station entries
nl80211: flush -> DEL_STATION wlan2 (all)
wlan2: Deauthenticate all stations
nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2462
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2462 wait=0 no_cck=0 no_ack=0 offchanok=0 CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 40 5d 82 d6 88 73 40 5d 82 d6 88 73 00 00 03 00
nl80211: Frame TX command accepted; cookie 0xdcbb4f40
wpa_driver_nl80211_set_key: ifindex=3 (wlan2) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 (wlan2) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 (wlan2) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 (wlan2) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
hostapd_cleanup(hapd=0x1b28300 (wlan2))
hostapd_free_hapd_data(wlan2)
hostapd_interface_deinit_free: driver=0x85458 drv_priv=0x1b28b68 -> hapd_deinit
nl80211: Remove monitor interface: refcount=0
nl80211: Remove beacon (ifindex=3)
netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Teardown AP(wlan2) - device_ap_sme=0 use_monitor=0 nl80211: Unsubscribe mgmt frames handle 0x893a05e9 (AP teardown)
hostapd_interface_free(0x1b276f0)
hostapd_interface_free: free hapd 0x1b28300
hostapd_cleanup_iface(0x1b276f0)
hostapd_cleanup_iface_partial(0x1b276f0)
hostapd_cleanup_iface: free iface=0x1b276f0



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux